Limited Slip Friction modifier.

[Banjer Picker]

Is there a "preferred" friction modifier for a D44 limited slip or are all the modifiers basically the same?

I'll move to a soft locker in front in the near future, but for now want the best I can get out of the LS.

 

[chadomatic]

I use the ford friction modifier in everything. Motorcraft XL-2

 

[sp71eb]

I use the ford friction modifier in everything. Motorcraft XL-2

That is what I use...make sure you take a good wiff of it before you put it in the diff. It smells of lilacs and rosemary.

 

[av bronco]

There is nothing soft about a soft locker, I have one in the rear and when going around a corner if you unload it it will pop so bad you'll think you snapped a axle, it would be hell on the front axle u joints.

 

[okorangebrnco]

Two bottles for a new unit and one for a used one. All modifiers are basically the same except for motorcraft which is preferred.

 

[Banjer Picker]

There is nothing soft about a soft locker, I have one in the rear and when going around a corner if you unload it it will pop so bad you'll think you snapped a axle, it would be hell on the front axle u joints.

I've actually got a Detroit in the rear already. A little wonky on the street but I'm ok with it. Upgraded my front axles n u joints so I think I'll be ok up there with a locker too (famous last words right?) lol

Thanks for the feedback gents.

 

[Banjer Picker]

Two bottles for a new unit and one for a used one. All modifiers are basically the same except for motorcraft which is preferred.

Thanks! Glad I asked the question now.