lookie here!

[73stallion]

just arived at dylan's about 1/2 hour ago. 302, 375 horsepower, 395 ft lbs of torque, aluminum heads, roller rockers, edelbrock air gap intake. we're putting a milodon pan on it, 670 truck avenger, HEI distributor, flowkooler water pump, etc...

 

[crawln68]

Ooooooooo, ahhhhhhhhh, I like go fast parts! ;D

 

[mkaenel]

can't wait to order mine...Please have him post how he likes it. I am wondering if it is just a little too much power for an EB.

Also what transmission is he running?

 

[trailpsycho]

Where did that come from? Thats no FRPP crate motor. Very nice!! How many Wendy's value menu items did that set you/him back?

 

[73stallion]

looks like it's not going in this week. the f**k ups at milodon gave me the wrong part number for the pickup tube so i can't put the damned pan on. 3 days up here for nothing!!!!! i'm about at the end of my sanity rope!!!

he paid $3200 shipped to his door. it's from an engine company in phoenix, they have an ebay listing.
http://cgi.ebay.com/ebaymotors/FORD...tegoryZ33615QQihZ004QQitemZ140037897777QQrdZ1

 

[ZookBronc]

I think its about 3500 wendys chrispy chicken sandwich's off the doller menu.

 

[Flippin71FI]

What heads are those?

 

[PBR]

even in high school dylan has always had the coolest $hit. if you read this dylan you suck!!!

ollie.

 

[trailpsycho]

The only thing that bothered me about their ad when somebody inquired about it a few weeks ago was the lack of mention of the amount of over-bore...0.02, 0.03 or 0.04 or God forbid 0.06. I take it that that was resolved before ordering, right? I have seen some ads that looked great until you get into the small print...why would I spend 2500-4000 on a motor that is bored 0.04 or 0.06, especially a stroker (keep in mind I am referring to an add I saw last year from an engine builder).

It sounds like this will be bad a$$ though...395 lb/ft--serious pull. Looks beautiful as well. Let us know how those Pro Comp aluminum heads work out for him. Also, one more Q, did he get them to swap out the cam? If so, what did he go with?

 

[73stallion]

same cam, everything's just as advertised.

he's gonna be running a C4 behind it. as soon as we get the engine in and running it's off to the tranny shop to get it strong enough for this engine.

 

[ZookBronc]

Why not just take the tranny in now?

 

[73stallion]

i don't want to deal with the exhaust that's right under the tranny, main reason.

 

[unclebap]

Now I know where the bad day came from!
Pickup tube problem, sounds familiar.

 

[73stallion]

wish that was all that's going on. got a lot of personal probs right now too...

i may not make it out to vegas after all, i'll call you this weekend.

 

[ZookBronc]

Sounds like you need a vacation.

 

[73stallion]

just had a 3 day weekend 4 wheeling. what i need is to drop off the face of the earth for a week or two. just can't happen right now.

 

[Project_bronco]

I think its about 3500 wendys chrispy chicken sandwich's off the doller menu.

LOL, I like the frostie comercial better.


On topic, That is a fine looking motor.

 

[bronco977]

What heads are those?

Unless I'm mistaken, the ProComp heads are made in Australia. I can't vouch for their heads, but I've got one of their distributors. Top quality stuff at a bargain basement price.

As I was typing this, a buddy of mine called. I asked him about the heads. He works for a shop that put some ProComp heads on a small block Chevy dirt circle car. He said that they are every bit the equal of Edelbrocks, at half the price.

 

[unclebap]

wheeling?

just had a 3 day weekend 4 wheeling. what i need is to drop off the face of the earth for a week or two. just can't happen right now.

So what's the problem?3 day weekend,wheeling,Good time,tired an broke something.

 

[Dave St]

can't wait to order mine...Please have him post how he likes it. I am wondering if it is just a little too much power for an EB.

Also what transmission is he running?

Too much power? Is there such a thing

Too much is not enough!!!