Looking for a HP44 76-77

[firemanbuttsy]

Im looking for a complete disc to disc 76-77 full width HP44 preferrably within a couple hundred miles of NOVA. Gearing doesnt matter but it is a bonus if it has 4:88s or deeper.
Thanks

 

[Broncitis]

I'm unclear what you're looking for?:?

Do you want a factory 76-77 Bronco disc brake low pinion 44 or a full width HP with discs out of a pickup?

I have original 76-77 front ends and might still have a full width HP unit as well.

I'm in PA but work in Baltimore, so its within easy driving if you're intersted.

 

[firemanbuttsy]

Im looking for a fullwidth out of a pickup if you have one. I prefer a 76-77 with the welded on radius arm mounts.

 

[Broncitis]

I'm almost certain I have some HP housings that are missing the knuckles out, but I don't know if they are 76-77 or not. I was not aware those years had welded C mounts.

Not sure if I have any complete still on the pallet of axles or not. I'll look this weekend.

 

[Broncoman]

I don't know if they are 76-77 or not. I was not aware those years had welded C mounts.

1966-70 king pin drum brakes not sure on wedges
1971-75 ball joint drum brakes welded on wedges
1976-77 ball joint disc brakes welded on wedges
1978-79 ball joint disc brakes with the cast wedges on passenger side

These are for full size truck

 

[Bronco73]

plus the axle housings with the welded on wedges(<>) have the thicker axle tubes.

 

[firemanbuttsy]

Exactly, Thats why they are the most desirable ones and the hardest to find though all of them are semi-plentiful its not like a chevy 60 or anything.

Broncitis if you could check it would be great since you are relatively close to me.

Thanks

 

[Bronco73]

I know of an 8 lug axle still under the truck but not sure if I could get to it before i move. It is for sale or was when i asked my buddy about it. I also know of two other trucks but not sure if they have the HD D44 or D60 axles under them. Again time is not on my side right now but I can try to see if they are for sale. These are all leaf spring set ups. i have not seen one with <> in a very long time.

 

[ponypower77]

I have a 77 with the welded wedges and disk brakes HP full width with 5.38 gears if you don't find any thing local.

 

[Broncitis]

Exactly, Thats why they are the most desirable ones and the hardest to find though all of them are semi-plentiful its not like a chevy 60 or anything.

Broncitis if you could check it would be great since you are relatively close to me.

Thanks

Sure, I'll look and see. I've bought quite a few over the years and just stripped them from the knuckles out for the dics and never payed much attention to the rest.

 

[Broncitis]

I looked yesterday and both HP housing I have are the cast c-bushing mount type.

 

[bigmuddy]

Broncitis, what do you want for one of the axles and what would be the shipping cost to 72143?

thanks Ben