• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Looking for Specs on 1969 302...

bulletpruf

Contributor
Sr. Member
Joined
Mar 31, 2019
Messages
522
Loc.
San Antonio, TX
Fellas -

I'm having difficulty finding specs on the 1969 302.

Would anyone be able to help out with the following:

Cylinder head casting number, combustion chamber size, valve size.

Block casting number, piston style (dish, flat top) and compression ratio.

Factory hp - 210? 220? Torque? 300?

I'm finding some info, but it's conflicting.

Thanks in advance for any input.

Scott
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Truck engines usually had less marketed HP than the car engines, and I believe (but will have to look up) ours were 205 and 300. Same up to '71, before they changed the ratings from GROSS to the newer more standardized NET HP rating methods.
Can't help on all the numbers and details though.

Paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Correct at 205/300 with an 8.6 : 1 compression ratio.

Paul
 
OP
OP
bulletpruf

bulletpruf

Contributor
Sr. Member
Joined
Mar 31, 2019
Messages
522
Loc.
San Antonio, TX
Truck engines usually had less marketed HP than the car engines, and I believe (but will have to look up) ours were 205 and 300. Same up to '71, before they changed the ratings from GROSS to the newer more standardized NET HP rating methods.
Can't help on all the numbers and details though.

Paul

Thanks, Paul. I saw 205, 210, and 220 hp quoted.

Difficult to nail down compression as well, with folks stating (guessing?) 8.6:1, 9:1, and 9.5:1.

On the heads, I'm guessing they are C9TE, 58.2 cc chambers, 1.78/1.45 valves.

On the block, maybe a C9TE-B?
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
Cylinder head casting #C9OE-E, 58.2CC combustion chamber, valve diameter 1.78" intake. 1.45" exhaust. Block #C9OE-6015-C. Piston #C8OE-6110-E, dished. HP205, torque was 300ft. lbs.
 
Top