Lubar Tire Size

[Ensane13]

I have an uncut 75 with a 2" lift, drum brakes. Can I get 33x10.50's under it? I know the common tire seems to be the 33x9.50 but I can't seem to find any available. I will also be buying rims at the same time so any advice would be awesome. I have two sets of 15" wagon wheels now one a 3.5 offset and another set at 4.5 and they both fit fine, I just want a 5th for the spare so I want all new. So I'm assuming the bigger offset would benefit me more with the wider tires? I'm also not against going to 17" rim or larger if more options are made available to me. This will also be my road driver. The 69 also in the garage is another question at another time

 

[ghost66]

I think 31x9.50x15 are the most you can fit without rubbing on a 2" lift uncut

 

[Ranchtruck]

235/85r16's fit if you're willing to find 16" wheels. They're a 32x9.5

 

[apachetech]

Interco makes a nice 32x9.5x15.

http://www.intercotire.com/tires.php?id=10&g=1

 

[Bronco Junkie]

I have an uncut with a Duff 2.5" lift. I am running 30 x 9.50's....I am pretty sure I could fit a 31 x 10.50 but I think it would rub during wheeling. I am not sure if an off-set wheel would make a difference.

 

[BoureeOne]

Look through this thread. Good variety and ideas for tires, rims and sizes. And some of the best Luber's you will ever see. Mustard in that thread is what made me decide to go back uncut.

http://classicbroncos.com/forums/showthread.php?t=178183&highlight=Luber+time

Scott

 

[BoureeOne]

I am going to run 2 1/2 "SL and 2" BL, Uncut, Orig stock rims and hub caps with 31X10.5x15.

 

[JefeAZ]

http://www.ebay.com/itm/INTERCO-SUP...ies&hash=item1c243c0924&vxp=mtr#ht_985wt_1116

 

[hucklburry rev2]

I'm running 34x9.5 on a 3.5" lift. It self clearanced (rubbed). When I wear these out, I will be trying to figure out the backspacing needed to fit 10.5 or wider tires in there.

 

[JefeAZ]

Uncut fenders? ^ Any pics?

 

[Ensane13]

The PO cut out the rears but I have the pieces so I plan on putting them back in. I don't plan on doing a body lift. (my other rig is 3.5" lift with 2" body cut outs with flares for my off road version) My hopes are to keep this one more tame and uncut and for daily diving non off road. Seems like 31x9.50 is the answer which is fine, also moving to the 16" rim isn't a problem

 

[Ensane13]

Interco makes a nice 32x9.5x15.

http://www.intercotire.com/tires.php?id=10&g=1

are these an ok daily driver tire? they seem agressive to me

 

[apachetech]

There are a couple of members on here that have those on. The 32x9.5 I hear are fine, but I have heard that the 34x9.5 have had bad reviews for coming apart.

 

[Ensane13]

There are a couple of members on here that have those on. The 32x9.5 I hear are fine, but I have heard that the 34x9.5 have had bad reviews for coming apart.

cool I will look further into those then. I was thinking about more of an AT tire since it will be road use only but I love the look of a MT on the broncos