• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Mac Tools Plasma cutter

fatboy

Contributor
Glad to be here.
Joined
May 15, 2006
Messages
7,145
Loc.
New Hampshire
Ok, not sure if I should post here or the off topic lounge so I will start here and if it needs to be moved it will be.

Found a plasma cutter on craigslist for $500 which on the surface sounds like a good deal. It is a Mac Model# PCA120 OCC edition that has seen maybe 5 hours of work total. Here are my questions:

1. Mac does not list this on it's web site and I believe it is actually a Miller unit but Mac only sold it for about 5 months so I am wondering why it was dropped so quickly.

2. It has 3.5 years left of a 5 year warranty so I am not sure what happens after that.

3. Will consumables be available?

4. It runs off of CO25(?) which I hear is a very expensive way to go. Supposedly there is a converter out there for it to switch it over to shop air but I cannot find it at the Mac web site. Can this be done affordably, and does it affect the operation of the cutter?

Anyone who knows anything would be greatly appreciated, maybe a Mac tool guy.

Thanks
Pete
 
OP
OP
fatboy

fatboy

Contributor
Glad to be here.
Joined
May 15, 2006
Messages
7,145
Loc.
New Hampshire
Been thinking of that one as well. You can gt it off of eBay for a song from Parker. My buddy actually bought the combo mig/stick/plasma. I have used the plasma on his machine and this unit will do everything I could ever want.

The Mac according to the guy on Craigslist, will cut 1 inch:eek: , not that I would ever need that type of duty cycle.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
If that part number is indicative of the peak amperage rating (120A?),, then the price is an absolute steal!. I recently bought a new Thermal Dynamics 151 100A machine that is rated for up to 1 1/4" steel cut and paid almost 3 grand for it.

You would need to figure out who made it to get tip parts though...
 

4x4babygirl

Bronco Goddess
Joined
Apr 11, 2005
Messages
1,744
Loc.
Tanasi
Kidney belongs to some tool forum and those guys know all about which lesser known brands are owned by bigger better (read: more expensive) brands. He was trying to get me to buy some Proto ratchets made by Mac the other night (I ended up buying a hot dog dog, yes, that's a stuffed puppy shaped like a hot dog, but that's another story). 4 Mac made ratchets (1/4, 2 3/8s and a 1/2) for $68, awesome deal. Anyway, when he gets up, I'll make sure he posts a link for you.
 

admin

Administrator
Just your friendly, neighborhood webmaster...
Joined
Jan 1, 2001
Messages
38,896
Loc.
Phoenix, AZ
Ok, not sure if I should post here or the off topic lounge so I will start here and if it needs to be moved it will be.
I'm good with tool posts in Bronco Chat as long as they're Bronco related. If you start asking about an injection pump puller for your Audi, then it'll be moved to Off Topic.;D
 
OP
OP
fatboy

fatboy

Contributor
Glad to be here.
Joined
May 15, 2006
Messages
7,145
Loc.
New Hampshire
I'm good with tool posts in Bronco Chat as long as they're Bronco related. If you start asking about an injection pump puller for your Audi, then it'll be moved to Off Topic.;D


Thanks, its all for the Bronco!!!!
 
OP
OP
fatboy

fatboy

Contributor
Glad to be here.
Joined
May 15, 2006
Messages
7,145
Loc.
New Hampshire
If that part number is indicative of the peak amperage rating (120A?),, then the price is an absolute steal!. I recently bought a new Thermal Dynamics 151 100A machine that is rated for up to 1 1/4" steel cut and paid almost 3 grand for it.

You would need to figure out who made it to get tip parts though...

It supposedly has four transformers in there and will cut 1" steel. Of course he is looking to sell it...
 
OP
OP
fatboy

fatboy

Contributor
Glad to be here.
Joined
May 15, 2006
Messages
7,145
Loc.
New Hampshire
Kidney belongs to some tool forum and those guys know all about which lesser known brands are owned by bigger better (read: more expensive) brands. He was trying to get me to buy some Proto ratchets made by Mac the other night (I ended up buying a hot dog dog, yes, that's a stuffed puppy shaped like a hot dog, but that's another story). 4 Mac made ratchets (1/4, 2 3/8s and a 1/2) for $68, awesome deal. Anyway, when he gets up, I'll make sure he posts a link for you.

Thanks Babygirl!
 
Top