• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

master cylinder push rod install

CopperRanger

Bronco Guru
Joined
Sep 26, 2007
Messages
1,796
Well, after dicking around with it for a while I got it. I'm thinking the clips that hold the rod in the master cylinder are made in china, not quite right. I bent the curled ends in a little more and a second set of hands to hold the rod in place while I pushed in on the edge of the clip. I also talked to Tom's and they said there really is no special way to get it in, just kind of push in all the way around.
 
Top