PA MEB Round Up parts thread

[ransil]

Kent Moore Time Sert thread repair kit J-42385-580 I think these work better than Helicoils this kit I believe was made for a chevy Quad 4 motor, I bought it cause individual set were stupid expensive and this was a variety pack. They are all metric. $100

Auto meter Tranny temp gauge & sender SOLD

Cyberdyne digital gauges volt and temp( red) $10

1 Allied Beadlock Black, new 17x9 $125

 

[ransil]

Fuel Filters, 5/16 connection I have a bunch $1 each

Carter P4070 In-Line Electric Fuel Pump I have 2 both used, both good SOLD

Centech Lawn mower ignition switches $5

D44 spare axle shafts $40 ea
might be a full size one in there, price doubles if you desperately need one on the trail plan ahead

Dick Cepek 700 watt dual relay, I have 4 2 used but were working when I removed,new ones 1 in package 1 loose $15 each used $25 each new

Valovline 50W oil for the T-case 1.5 quarts free with purchase

 

[68rockcrawler]

3-1/2" progessive rate coils and springs $400 OBO:
https://classicbroncos.com/forums/showthread.php?p=3204497#post3204497

This would involve a parking lot swap to pull these springs out at the Roundup and put in my new ones, if someone wants them. I can't pull them out yet because I am hoping to pick my new springs up at the Roundup.

 

[hankjr]

I'm looking for the back 17-18" of a hard top - no lift gate req'd, no glass, no hardware, just the sheet metal. As long as you can't put your fist thru it and too rusty.
There has to be a junk top laying around somewhere that you need to get rid of.
Thanks Al

i might be able to hook you up with the back inches of a hardtop

will PM you

Hank

 

[Muddy1966Bronco]

I have most of the parts in my old sale thread still. With the addition of a factory rear tire rack, half cab rollbar, ‘76 302 manifolds (need broken studs removed), and possibly some other small parts. Just PM and ask if you want me to bring something along or want to shoot an offer or trade. I don’t mind packing small stuff. Bigger things would need a payment before bringing.

https://classicbroncos.com/forums/showthread.php?t=290915

 

[hyghlndr]

Looking for the tailgate "bar" that Bestop uses to hold the top down across the tailgate opening.

Also looking for a nice hardtop, hubcaps, and frame with title.

Thanks

 

[JohnJohn]

I can bring these to the Roundup. PM me if you want something.

77 factory transfer case skid plate in good condition $75

Bronco cluster gauge. It has a small hole the previous owner drilled on the side but it doesn't effect the gauge and can't be seen when installed. $70

77 bronco wiper cover painted black with cabin light $60

76 77 drop pitman arm $30

 

[ransil]

Few more last minute items I Found

Brake portioning valve block off a 1972 Bronco with the rubber lines $30

Ford Motorsports Blue Oval Carb Air cleaner wing nut Sold

Cross over Radiator pipe for 5.0L to stock radiator Sold

 

[hyghlndr]

Wild Horses 2 1/2 inch front springs, about 1k miles on them. $100

Sway Bars front and rear, see pictures $200/bo

Door hinges, one side only, 4 of them. $80/bo

 

[hyghlndr]

Let me know if there is any interest in the Bronco Designs or other parts. Not bringing anything unless someone is interested...thanks