• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Misc Bronco Parts

Status
Not open for further replies.

iamfastrr

Full Member
Joined
Feb 16, 2007
Messages
226
I have many parts from a bronco that I took apart. I have a lot of the small misc. parts and a few of the large parts.

Below is a partial list of some bigger parts:
Ford 9" small bearing complete w/3.50 gears - $150
Stock driveshafts - $20 each
Dana 20 J-shift transfer case - SOLD
Stock 3 speed manual w/clutch and flywheel - SOLD
2 - 3 speed Hurst floor shifters - BOTH SOLD
2- manual steering boxes - FREE plus shipping
Stock radiator - no leaks - SOLD
Main and 2 Aux. fuel tanks, all are plastic - $30 each
Stock rear main fuel tank skid plate. - $30
Complete heater box - $40
Fuel tank filler tubes - $15
Radius arms - $40
Front & Rear Seats - SOLD
Driver & Passenger doors - a little rust on the bottom seam but nothing major - SOLD


I have many of the small parts too.
 

Attachments

  • Doors 009.jpg
    Doors 009.jpg
    111 KB · Views: 69
  • Doors 012.jpg
    Doors 012.jpg
    108 KB · Views: 75
Last edited:
OP
OP
iamfastrr

iamfastrr

Full Member
Joined
Feb 16, 2007
Messages
226
Front Drive Shaft & Manual Steering Box

do you have a front driveshaft?
how much for the manual steering box?

I do have a front drive shaft.
How about $10 plus shipping for the manual steering box?
 

yfz450sew

Full Member
Joined
Mar 25, 2008
Messages
252
I think I asked before but what will you let the doors go for? Is the glass all good in them? Do they need new metal put in them? and finally do you ever venture toward San Berdo or closer to Cajon pass area?
 

Airborne69

Sr. Member
Joined
Nov 19, 2005
Messages
683
Loc.
Moorpark, CA
how much for the front driveshaft too?

What condition is the steering box in? Does it leak or have any slop? I am just trying to replace my leaky box.
 
OP
OP
iamfastrr

iamfastrr

Full Member
Joined
Feb 16, 2007
Messages
226
Drive Shaft & Steering Box

how much for the front driveshaft too?

What condition is the steering box in? Does it leak or have any slop? I am just trying to replace my leaky box.

$10.00 plus shipping for the front driveshaft

The box didn't leak. I took it off for power steering.
 

Airborne69

Sr. Member
Joined
Nov 19, 2005
Messages
683
Loc.
Moorpark, CA
$10.00 plus shipping for the front driveshaft

The box didn't leak. I took it off for power steering.

ok cool could i get a quote for shipping for both of those to 91042?
I am located by L.A. so maybe we could also work something out for picking them up
 

Gas Pig

Bronco Guru
Joined
Oct 19, 2005
Messages
2,721
Aux. tank

Hey I sent you and e-mail on the Aux. tanks your selling.

Thanks Jeff
 
OP
OP
iamfastrr

iamfastrr

Full Member
Joined
Feb 16, 2007
Messages
226
Lowered Prices....come on people...I would like to see this stuff to go.
 
Status
Not open for further replies.
Top