Misc dash and plastic parts needed

[kaisermusic]

need:

battery tray and brackets (just plain steel or aluminum, no diamond plate)
hoses that goto defrost vent (not ripped or broken)
drivers side fresh air vent
4-6 knobs for a 1967 (67 only please, in good shape)
brake light sensor swith for 67
hazard flasher switch for 67
glove box liner
e-brake pedal setup
transmission bushings

 

[tml]

need:

battery tray and brackets (just plain steel or aluminum, no diamond plate)
hoses that goto defrost vent (not ripped or broken)
drivers side fresh air vent
4-6 knobs for a 1967 (67 only please, in good shape)
brake light sensor swith for 67
hazard flasher switch for 67
glove box liner
e-brake pedal setup
transmission bushings

I've got a Drivers fresh air vent for ya. I believe they were all the same size.. I think I may also have an Ebrake set up. I'll have to look.

 

[BroncoKrawler]

Pretty sure I have an EBrake setup for ya. Are you just looking for the mount, pedal and firewall linkage?

 

[kaisermusic]

as far as ebrake goes, just looking for pedal and mounting hardware, i have everything else in place.

 

[BroncoKrawler]

Here is the Ebrake setup that I have. Let me know if you are interested.

 

[elkarcher]

what was teh difference in the knobs from year to year. I ahve quite a few.

 

[kaisermusic]

not sure about the knobs, but if you have 6 that match in good shape I'm interested

 

[elkarcher]

I will check any particular ones that you want. I know I have the knobs and cables that go with. Let me know Tim

 

[kaisermusic]

bump...

still needing all these parts.

 

[elkarcher]

I got the knobs let me know what ones you need. i will send pics also just in case. Tim

 

[BroncoKrawler]

Still have the Ebrake setup listed in my post above. I'm going to sand clean her up a little bit this weekend.

 

[BajaBronco]

I have the glovebox liner new.