UPDATED 11/18/11, sold items removed from listing. See pictures following throughout the thread below.
Local pick up gets priority. I just don't have time for shipping on most of this. Any S&H at buyers expense. No offers including shipping, because then I have to figure out how much it will cost to evaluate your offer. Again, the lack of time thing causing the problem . . . .
Engine and related:
OFFER -rebuilt 302 short block (mid 80's truck block casting); good runner, no probs on highway at 70mph or around town before I took it out; pick up only; free engine stand bolted to it!
OFFER -cast aluminum Ford valve covers; finned and embossed lettered tops (see pictures below), peeling chrome needs to be stripped, then refinish to your liking; same as the $120-200 version with different logo
50.00 -NEW Holley mechanical fuel pump, 80gph, polished, never used (sending back to Summit, less restock fee if no one wants it)
175.00 -Holley carb; 600CFM, elec choke; almost new, Ford AT w/kickdown bracket
15.00 -kickdown rod
15.00 -3 groove, 3 bolt crank pulley
25.00 -stock PS pump ('75) with pulley and brackets
25.00 -stock type 60A alternator converted to 2 wire/onboard regulator
20.00 -V belt alt pulley; March; polished with cover ($45 new)
5.00 -2 pc alt brackets; stock type - steel
10.00 -2 pc alt brackets; stock type - chrome
Dash related:
75.00 -stock dash panel w/single DIN radio cutout
50.00 -stock speedo/cluster; everything worked when removed - gauges and indicators
5.00 -stock speedo cable (used in stock cluster and auto trans/transfer case); free with purchase of gauge cluster
30.00 -Autometer Ultra-Lite fuel gauge - NEW/never used, for stock EB sender; electric; alum trim ring, silver face; $45 new; (sending back to Summit, less restock fee if no one wants it)
10.00 -Sunpro tachometer; 3" (approx) column mount
offer -plastic column bezel; stock type, sanded smooth for repainting
Other interior:
25.00 -NEW Billet Specialties round in-dash vents ($23 ea new) w/polished billet alum bezels - never used (currently packaged and ship'able to you 1lb, 1oz); (sending back to Summit, less restock fee if no one wants it)
offer -NEW Vintage Air chrome drier; never used - still sealed; with bracket; vertical mount ($70 new)
10.00 - rear bed carpet hold down trim piece; polished
offer - front/rear seat belts; not sure of vintage (may not be factory - see picture of fronts); black/blue (faded black webbing)
cheap - rectangular transfer case shifter boot/chrome bezel (fair condition)
Body/exterior/other:
25.00 -stock hood latch system, 3pc - latch that bolts to core support, pin and safety catch/release; used, good condition, no rust
75.00 -4x alum rims; aftermarket; 15" x 9.5"; 3.5" BS - hard to find; 80's style swirl 3 hole; good beaters, no spacers required; pick up only (see the single wheel picture)
door parts:
window regulators
window tracks
interior door panels
glass
stock hinges
locks
almost everything but the shells . . .
cheap -aftermarket coolant overflow tank (good condition, but inexpensive)
cheap -stock brake (drum/drum) distribution block (fair condition)
offer -butchered '75 wiring harness with many of the connectors, fuse block, etc
10 - 6-blade 18" rigid fan
offer -fuel selector valve
5 -fuel expansion tank cover plate
offer -floor dimmer switch
$45 - Lizard Skin Superpro spray gun kit ($80 new); used only for one complete application
misc other: jack hold down/bracket, 2 pc. overflow tank hold down/bracket(needs to be re-riveted or use bolts), distributor hold down, 1 or 2 lower dash brackets, a couple fender braces, misc odds and ends on death row for just a bit longer . . .
feel free to ask about anything else in the pictures
terms disclaimer: cash, as is, where is, but happy to discuss alternatives; best offer as determined by me always wins
may be willing to consider interesting trades - see post #17 for ideas. Local pick-up - will trade parts for beer!
Local pick up gets priority. I just don't have time for shipping on most of this. Any S&H at buyers expense. No offers including shipping, because then I have to figure out how much it will cost to evaluate your offer. Again, the lack of time thing causing the problem . . . .
Engine and related:
OFFER -rebuilt 302 short block (mid 80's truck block casting); good runner, no probs on highway at 70mph or around town before I took it out; pick up only; free engine stand bolted to it!
OFFER -cast aluminum Ford valve covers; finned and embossed lettered tops (see pictures below), peeling chrome needs to be stripped, then refinish to your liking; same as the $120-200 version with different logo
50.00 -NEW Holley mechanical fuel pump, 80gph, polished, never used (sending back to Summit, less restock fee if no one wants it)
175.00 -Holley carb; 600CFM, elec choke; almost new, Ford AT w/kickdown bracket
15.00 -kickdown rod
15.00 -3 groove, 3 bolt crank pulley
25.00 -stock PS pump ('75) with pulley and brackets
25.00 -stock type 60A alternator converted to 2 wire/onboard regulator
20.00 -V belt alt pulley; March; polished with cover ($45 new)
5.00 -2 pc alt brackets; stock type - steel
10.00 -2 pc alt brackets; stock type - chrome
Dash related:
75.00 -stock dash panel w/single DIN radio cutout
50.00 -stock speedo/cluster; everything worked when removed - gauges and indicators
5.00 -stock speedo cable (used in stock cluster and auto trans/transfer case); free with purchase of gauge cluster
30.00 -Autometer Ultra-Lite fuel gauge - NEW/never used, for stock EB sender; electric; alum trim ring, silver face; $45 new; (sending back to Summit, less restock fee if no one wants it)
10.00 -Sunpro tachometer; 3" (approx) column mount
offer -plastic column bezel; stock type, sanded smooth for repainting
Other interior:
25.00 -NEW Billet Specialties round in-dash vents ($23 ea new) w/polished billet alum bezels - never used (currently packaged and ship'able to you 1lb, 1oz); (sending back to Summit, less restock fee if no one wants it)
offer -NEW Vintage Air chrome drier; never used - still sealed; with bracket; vertical mount ($70 new)
10.00 - rear bed carpet hold down trim piece; polished
offer - front/rear seat belts; not sure of vintage (may not be factory - see picture of fronts); black/blue (faded black webbing)
cheap - rectangular transfer case shifter boot/chrome bezel (fair condition)
Body/exterior/other:
25.00 -stock hood latch system, 3pc - latch that bolts to core support, pin and safety catch/release; used, good condition, no rust
75.00 -4x alum rims; aftermarket; 15" x 9.5"; 3.5" BS - hard to find; 80's style swirl 3 hole; good beaters, no spacers required; pick up only (see the single wheel picture)
door parts:
window regulators
window tracks
interior door panels
glass
stock hinges
locks
almost everything but the shells . . .
cheap -aftermarket coolant overflow tank (good condition, but inexpensive)
cheap -stock brake (drum/drum) distribution block (fair condition)
offer -butchered '75 wiring harness with many of the connectors, fuse block, etc
10 - 6-blade 18" rigid fan
offer -fuel selector valve
5 -fuel expansion tank cover plate
offer -floor dimmer switch
$45 - Lizard Skin Superpro spray gun kit ($80 new); used only for one complete application
misc other: jack hold down/bracket, 2 pc. overflow tank hold down/bracket(needs to be re-riveted or use bolts), distributor hold down, 1 or 2 lower dash brackets, a couple fender braces, misc odds and ends on death row for just a bit longer . . .
feel free to ask about anything else in the pictures
terms disclaimer: cash, as is, where is, but happy to discuss alternatives; best offer as determined by me always wins
may be willing to consider interesting trades - see post #17 for ideas. Local pick-up - will trade parts for beer!
Attachments
Last edited:
