• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Modified Half Cab

fstik

Full Member
Joined
Feb 7, 2004
Messages
311
https://miami.craigslist.org/brw/pts/6089975784.html

Was ready to buy this and then looked closer at the back window. Looks like the liftgate from a full top was attached to replace the back window on the half cab. Talked to the new owner and he said that brackets were made to keep the liftgate closed. Not sure how this would affect the footprint of the half cab, or if it even matches up to a standard bulkhead. Any thoughts on the actual value?

fstik
 

KBUCK1

Sr. Member
Joined
Feb 8, 2011
Messages
979
Too much for that top. Full top cut down to a half cab probably. For that money you should buy a bronco design top
 
OP
OP
F

fstik

Full Member
Joined
Feb 7, 2004
Messages
311
half cab

Yep, Same one!!! I was wondering how it attached to the bulkhead, BnF's pics solved that mystery...
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
The OEM half cab tops had the back panels and glass angled in toward the bottoms of the seats. They actually followed the backs of the seats and left absolutely no room behind them for anything. My assumption would be to make the bed as large as possible. With that top, you'd need a bulkhead that came straight down and installed right at the edge of the wheel wells. To me a cut town full top with a lift gate in the back is a cool oddity, but only has value to someone looking for an oddity like it. $750 seems steep to me as you can buy OEM half cab tops for that and there's a big demand for those. Not much demand for cut down full tops.
 

Eoth

Bronco Guru
Joined
Mar 10, 2004
Messages
1,692
Not worth it for "resale" but not a bad price if that is what you want. Cost of a decent full cab to modify, plus time and material typically would be higher. Looks like a decent job.... Make him an offer if you like it.
 
Top