Mounting visors without wiper cover

[Bronco_007]

Hi people. How you working around this? I’d like to be able to have use of my factory visors but am deep siding the wiper cover. It’s cracked and in the way when we go topless. Any aftermarket brackets or homemade remedies? Thanks!

 

[BronCowie]

This is what I did (idea stolen with pride idea from someone else here) All you need is a little flat stock steel and some 1/4" rubber tubing.

 

[Eoth]

I have a set of these... Warning, they are pricy but awesome (well as awesome as visors get). There was a mass buy many years ago and got lucky...
https://www.rosenvisor.com/store/c80/Automotive_/_Off_Road.html

 

[Bronco_007]

This is what I did (idea stolen with pride idea from someone else here) All you need is a little flat stock steel and some 1/4" rubber tubing.

View attachment 892187

I knew someone on here had MacGuyver’d something!!! Any idea what thread that bolt is you used? I’m gonna need to grab one a bit longer…

 

[BronCowie]

I knew someone on here had MacGuyver’d something!!! Any idea what thread that bolt is you used? I’m gonna need to grab one a bit longer…

I don't recall the thread size. All I did was remove the original and found a longer one in my shop supply bin.

 

[ShoeSlinger]

My head is so close to the top at 5'11" that I am debating on no visors on my current build.

 

[Bronco_007]

My head is so close to the top at 5'11" that I am debating on no visors on my current build.

No kidding! I’m six feet and didnt consider that. A very good thought, sir.