mustang 302 roller motor carb recommendation

[yesters3]

1996 mustang 302 DUI ignition and currently has the quadrajet from BC Broncos and just have never been happy. I admit i'm not a carbuerater man and according to my mechanic he suggests scrapping it. Trouble cold starting, Choke, and loading up problems. Street vehicle 95% of the time.
Need new carb suggestions please . One guy told me to go with a Holley 500cfm?
Thanks

 

[DonaldDouchebag]

1996 mustang 302 DUI ignition and currently has the quadrajet from BC Broncos and just have never been happy. I admit i'm not a carbuerater man and according to my mechanic he suggests scrapping it. Trouble cold starting, Choke, and loading up problems. Street vehicle 95% of the time.
Need new carb suggestions please . One guy told me to go with a Holley 500cfm?
Thanks

I had the Holley 500cfm two barrel and wasn't happy with it. Something like a 600cfm four barrel actually has smaller primaries. I've had good luck with my Edelbrock 600cfm. (mine is a non roller motor)

 

[65 mustang]

use a 600 vac secondary. Scott

 

[yesters3]

use a 600 vac secondary. Scott

Thanks ....I think i'll go with the 600 cfm as suggested. Just doesn't seem right to put a 2 barrel on an 4 barrel intake.