Calibronc66
Full Member
- Joined
- Dec 15, 2016
- Messages
- 253
I have stocked up over the years, thinking this was the route I was going but have decided to go with a 351 so I won’t be using any of this. I would like to sell complete. I’ll ship on your dime. $650 takes it all.
Intake from 01 Explorer
Harness is Ron Francis REFUBISHED
MSD distributor NEW
MSD coil NEW
1” spacer for intake
Fel pro gasket for intake
19lb and 24lb injectors used
65 mm throttle body NEW
All sensors are new in box (oxygen, temp, ?)
Mass flow housing and sensor used
92 mustang fuel rail used
Aeromotive pressure Gauge
Aeromotive Regulator new
Speedo cable for EFI
A9P and 8LD computers
Lokar throttle cable bracket
Intake from 01 Explorer
Harness is Ron Francis REFUBISHED
MSD distributor NEW
MSD coil NEW
1” spacer for intake
Fel pro gasket for intake
19lb and 24lb injectors used
65 mm throttle body NEW
All sensors are new in box (oxygen, temp, ?)
Mass flow housing and sensor used
92 mustang fuel rail used
Aeromotive pressure Gauge
Aeromotive Regulator new
Speedo cable for EFI
A9P and 8LD computers
Lokar throttle cable bracket
Attachments
-
54F62200-3F1F-484E-8198-84A6FDC6CC35.jpg93.1 KB · Views: 128
-
B7C147A3-CF5E-4FCF-A2B3-2A02298C1517.jpg114.4 KB · Views: 145
-
EFFD955F-E80B-4C92-8DFC-6E07FC9510C5.jpg145.3 KB · Views: 129
-
F8FA2129-787F-4E51-BD02-D1E678EFA130.jpg138 KB · Views: 143
-
F831FF3F-F749-4BFE-8810-5AB109F5FB59.jpg101.9 KB · Views: 123
-
883CE087-1019-4266-BBD4-12EDC55D168F.jpg89.6 KB · Views: 111
-
21FBA36D-8B7C-4314-8382-7F331DED59B9.jpg107.9 KB · Views: 102
Last edited: