• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

mustang hydroboost question

Cavalry

Full Member
Joined
Aug 25, 2001
Messages
786
Loc.
I HATE UPSTATE NY
Looking at mustang HB's there is a difference with traction control and non. does this effect me or is it just a plug or something I wont use. Is the mustang master cyl a good choice for 4 wheel discs?
 
Joined
Jun 12, 2005
Messages
3
Look for a late 70s Lincoln MK5 it had 4wdb and the calipers were about the same as what you would have used.
 

Broncobowsher

Total hack
Joined
Jun 4, 2002
Messages
35,697
OK, back to the original question...

I do not know. Just to be safe I picked one for non-ABS non-traction control. Just regular brakes. Works very well. Even get compliments from Mr. Hydroboost himself (Todd Z.)
By using the Mustang master cylinder I know everything is matched and no worries about the pin between the two being too short or too long.
 
Top