Mustang Serp Setup w/ Taurus Electric Fan Pics

[contactwilson]

Does anybody have any pictures of the Mustang serpentine setup with the Taurus electric fan setup? Alternate pictures of other fans would also help. Thanks

 

[contactwilson]

I also want to add that I am running the stock radiator.

 

[Amac70]

ill be the first to say it doesn't fit. but if someone has found away i would like to see the pictures. I tried on mine and even moving the radiator forward about 1.5 and hacking the shround on the taurus fan i still could not get it to clear. it might clear the stock v belt stuff but no where close on my serp stuff. but i have been proven wrong before so lets see those pictures.

 

[68rockcrawler]

I have a 4 core radiator pushed tight to the core support and Mustang serpentine and was wanting to stick a Taurus fan in there. I needed at least 1.5" more inches to get it to fit so I gave up. I think you either need to get the Explorer serpentine setup (not sure how much room this gains you) or cut up the core support and push the radiator out to the grill.

 

[Skiddy]

ill be the first to say it doesn't fit. but if someone has found away i would like to see the pictures. I tried on mine and even moving the radiator forward about 1.5 and hacking the shround on the taurus fan i still could not get it to clear. it might clear the stock v belt stuff but no where close on my serp stuff. but i have been proven wrong before so lets see those pictures.

same here with no such luck without moving the core support.

 

[getfuzzy]

I'm Running the Mark 8 fan and had to move the Rad all the way to the grill. I like the fit of the Mark 8 better than the Taurus. But then again I made the bracket for the surp set up.