• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

My build with my son

Stritikus

New Member
Joined
Mar 18, 2023
Messages
2
(Everything I state is my novice knowledge so please forgive me if I am wrong or don’t understand)
Advice please , I am working on a build with my son for him to drive when he turns 16 next year.
I have a 69 (6 cyl) frame with 4:11 gears Dana 30 front. So my ADD is kicking in and I am too scattered …I have a set of 4.57 posi axles with a Dana 44 front and a set of 4.57 opens with a Dana 44 front
My goal is to install 302 (found a 74 auto F-100 donor) what do I need to make this work ?
Which set of axles for a daily teenager with a 2.5 lift ?
I am thinking of disc brake conversion, would that affect your choice?
What would y’all do?!?!
 

Cooter_76

Sr. Member
Joined
May 18, 2004
Messages
863
Tire size and transmission often dictate which gears people recommend. The typical rule of thumb for a non-overdrive transmission is 4.11 gears for 33" tires and 4.56 gears for 35" tires.
 

muskrat

Bronco Guru
Joined
Aug 21, 2008
Messages
1,503
For a teenage driver, I’d suggest a 6 point cage tied to frame, 4 point harnesses and disk w hydroboost braking.

He’ll be the envy of the high school parking lot!


Sent from my iPhone using Tapatalk
 

LUBr LuvR

Contributor
Bronco Guru
Joined
Dec 31, 2015
Messages
2,228
Your son will hate this suggestion, but here goes.....

As a first vehicle, have him get something reliable and just slightly underpowered to learn on and get driving miles under his belt.

Let him share in the cost and experience of building his Bronco so he’s truly invested in it, heart soul and wallet. Take your time sorting it out and prioritize making it safe. Work on brakes, steering and handling BEFORE making it more powerful. Your son may very well be used to driving 50 year old vehicles, but if not there’s a bit of a learning curve. Young drivers, powerful high center of gravity vehicles and the urge to show off can have unfortunate consequences.

Also, look into insurance. Not every company will allow daily driving of a classic, or cover appropriate value if it is used as such. You may need to lay down some rules about not allowing his friends behind the wheel.

Lots to think about, but most of all is keeping your son safe to enjoy his rig for years to come. From your avatar pic he’s already thrilled to have it. Enjoy the journey!!

You will find this site to be a great resource of knowledge, welcome!
 
Last edited:

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,553
Mary makes some really good suggestions. Some of us didn't go that way with our young new drivers. That avatar picture was my daughters daily driver her junior and senior year in high school. Her other car was an 03 mach 1. She bought that one. My suggestions for your build, Keep it simple. Get it running first. Do the upgrades with him involved as you go. Its the best way for him to stay interested and learning as you go. With the desire to go do something and the need to get the vehicle fixed comes learning. time management, money management, are all a part of this adventure.
 

BOBS 2 68S

Full Member
Joined
Jul 26, 2015
Messages
280
Loc.
Hudson, CO
Also the I6 trans will need to be replaced.
LUBr LuvR has a good point. When I got my 1st Bronco in 1979 we were smarter than our cars. Now days they are trained to drive in cars with all kinds of safety systems.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Your son will hate this suggestion, but here goes.....

As a first vehicle, have him get something reliable and just slightly underpowered to learn on and get driving miles under his belt.

Let him share in the cost and experience of building his Bronco so he’s truly invested in it, heart soul and wallet. Take your time sorting it out and prioritize making it safe. Work on brakes, steering and handling BEFORE making it more powerful. Your son may very well be used to driving 50 year old vehicles, but if not there’s a bit of a learning curve. Young drivers, powerful high center of gravity vehicles and the urge to show off can have unfortunate consequences.

Also, look into insurance. Not every company will allow daily driving of a classic, or cover appropriate value if it is used as such. You may need to lay down some rules about not allowing his friends behind the wheel.

Lots to think about, but most of all is keeping your son safe to enjoy his rig for years to come. From your avatar pic he’s already thrilled to have it. Enjoy the journey!!

You will find this site to be a great resource of knowledge, welcome!

X10.. well said
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Mary makes some really good suggestions. Some of us didn't go that way with our young new drivers. That avatar picture was my daughters daily driver her junior and senior year in high school. Her other car was an 03 mach 1. She bought that one. My suggestions for your build, Keep it simple. Get it running first. Do the upgrades with him involved as you go. Its the best way for him to stay interested and learning as you go. With the desire to go do something and the need to get the vehicle fixed comes learning. time management, money management, are all a part of this adventure.
and an adventure it definitely will be :D
 
Top