My solution for US Shift trans controller mounting

[Qumanchew]

I just finished this up and thought it turned out good so I figured I'd share. Let me start off by saying I'm very happy with the controller overall, mounting options not so much. I've had the bronco on the road for a year now and the controller has just been hanging under the dash with 4' of extra wiring coiled up on the trans hump. With wiring coming out of three sides it's not easy to mount it and not see the wiring. I also needed a place for two gauges so here's what I came up with.

 

[bigmuddy]

i like it, I am getting ready to need to do the same.

by the way, did you build the console for the winters shifter? Looks great too.

 

[Fitz24]

I just finished this up and thought it turned out good so I figured I'd share. Let me start off by saying I'm very happy with the controller overall, mounting options not so much. I've had the bronco on the road for a year now and the controller has just been hanging under the dash with 4' of extra wiring coiled up on the trans hump. With wiring coming out of three sides it's not easy to mount it and not see the wiring. I also needed a place for two gauges so here's what I came up with.

That looks really good. Makes me think I need to redo my setup mad: Are those JB cable twin sticks? I like your center console also. Is that one you fabricated or other?

 

[Scoop]

Very nice! I like how you matched the shape and look of it to the lines of the dash.

 

[bronco loco]

I mounted slightly different with the help of a fellow member

 

[Qumanchew]

Thanks for the compliments! Those are JB cable twin sticks and I'm extremely happy with them! They work great and the mounting options are endless. I built the console also.

 

[Qumanchew]

I mounted slightly different with the help of a fellow member

Looks good! My hats off to anyone who comes up with a good way to mount these controllers.

 

[Qumanchew]

Here's a couple pics of the console .

 

[bigmuddy]

Looks great, what is the width and length of the console. I am going to do something similar when it comes back from paint.

 

[Qumanchew]

I don't remember off hand. I'll measure it tomorrow.

 

[bigmuddy]

Thanks much!

 

[sprdv1]

very clean... Looks awesome..

Nice job

 

[Qumanchew]

Hey Bigmuddy, I apologize for not posting those dimensions for the console, completely slipped my mind. It is 10" wide and 33"long.