need a better picture of this....

[T-Bird]

Here's some.
http://roadsteru13.com/u13fordbroncos/roadster-shop/

I ordered those decals too, Tim also has reproduced the 66 air seal, & the square cowl to hood weather seal as well....and only has a few left.

 

[Bronco Junkie]

Are they Roadster only stickers?

 

[okie4570]

Not just for u13, the pic I posted is on my u14.

 

[Bronco Junkie]

Sweet! I am going to get one for my uncut. Is that the stock location as far as you know? I could swear the other one I saw was on the fender well. Thanks again for the link.

 

[okie4570]

That's the location for the u14 I know. The u13 and u15 I can't confirm for sure, some of the gurus will know.

 

[T-Bird]

That's the location for the u14 I know. The u13 and u15 I can't confirm for sure, some of the gurus will know.

That's where mine is too, on my U14

 

[daddycreswell]

I just bought a 70 bronco that has the Koenig winch and the stickers inside the cab on the dash and they have seen there better days. I would love to get my hands on a new set.

@Mill KNOB, can you see any of the wording on them? If so can you upload a picture for me so I can get more information off of them.

 

[daddycreswell]

@T-Bird give me some more time, I tried to cut them out tonight and my letters are to small, the cutter tears them to the point I can't use them. Looking at a picture from an old thread I made the sun visor decal 3.5x6. I might go 4x6, to big?

Sent from my SM-G920V using Tapatalk

 

[Mill KNOB]

@Mill KNOB, can you see any of the wording on them? If so can you upload a picture for me so I can get more information off of them.

This is the best one that I could get. There is not much left of mine as you can see.
I also have a bunch of documents of the winch that I can load up and share if any body is interested.

 

[okie4570]

This is the best one that I could get. There is not much left of mine as you can see.
I also have a bunch of documents of the winch that I can load up and share if any body is interested.

This pic has a clear line 7! "shift transmission into low gear".............. one mystery solved

 

[daddycreswell]

This pic has a clear line 7! "shift transmission into low gear".............. one mystery solved

1 line closer.

Sent from my SM-G920V using Tapatalk

 

[daddycreswell]

This is the best one that I could get. There is not much left of mine as you can see.
I also have a bunch of documents of the winch that I can load up and share if any body is interested.

Can you give me a rough estimate on the length x width?

Sent from my SM-G920V using Tapatalk

 

[T-Bird]

@T-Bird give me some more time, I tried to cut them out tonight and my letters are to small, the cutter tears them to the point I can't use them. Looking at a picture from an old thread I made the sun visor decal 3.5x6. I might go 4x6, to big?

Sent from my SM-G920V using Tapatalk

No big hurry on mine Josh...I'm just now starting on my restoration.
"I do need a early 4 rod brace 66 hood" good shape!
Please keep an eye out for me
Thanks
Terry

 

[daddycreswell]

No big hurry on mine Josh...I'm just now starting on my restoration.

Good deal, I'll take my time getting it right then.

Sent from my SM-G920V using Tapatalk

 

[Scott C.]

Yes, the jack sticker is in the same location weather it is a U13, 14, or 15.

I will get ahold of Jay and have him get me some pictures of the Koenig sticker, with measurements.

 

[sriha]

Here's some.
http://roadsteru13.com/u13fordbroncos/roadster-shop/

The site has a transfer case shift pattern decal that differs from my 66. Mine includes 2L, I will have to take a picture of it but its pretty faded. I'm surprised that sticker survived on mine since its the only one.

 

[Mill KNOB]

Can you give me a rough estimate on the length x width?

Sent from my SM-G920V using Tapatalk

Will once I get home.

 

[Bronco Junkie]

OK, I can see the difference better now. My jack is located under the hood...so obviously I would have a different sticker location and probably a different sticker. Thanks.

 

[okie4570]

I would think the u15 sticker would be the same, just a different location, as the lift points would be the same.

 

[CopperRanger]

Here are a few pictures off a dash I have, came from a 71. The sticker looks to be 5 1/2" X 2 1/2" Hope this will help.