Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
I did the 78 Lincloln Mark brakes on mine.
Another alternative is the 73 Tbird rear discs
The conversion depends on the rear end of your Bronco.
Small bearing is the 73 type, large bearing is the Lincoln type
Read my rant on the left<<
TOFIC
I used '77 (I believe) Mark VII brakes and have no problems with them. There is some machine work involved, but most of it was done by the guy I bought the parts from.
I am running the explorer set up- It bolts onto the large bearing 9in with no mods- it has the parking break built in. You just need to drill the rotors- It works great so far- check WH, they sell the parts also including the ebrake cables