Need photo of temp control switch

[cole]

Hi

I have a 69 Bronco that PO had eliminated temp control valve, so my cable is connected to nothing in the engine compartment. I have ordered a new valve but would like to see how it should be mounted/connected under the hood. Which hose does it go too(intake or water pump) how is the valve mounted for the cable to pull?

Any help is appreciated.

Jim

 

[taylorB]

To dark for me to get a pick up, but your going to intercept the hose from the top of the water pump. i ran the line between the valve cover and the carb. the valve sits about at the back of the carb then the hose shoots over to the heater core.

I have the heater hose wedged between the coil and the intake mani. its tucked down there and you can hardly see it.

I have seen it ran a couple of ways but cant recall exactly how they did it.
who knows, my way could be totally wrong ha Goodluck!!

 

[cole]

Thanks, I see the cable coming out from the firewall and just want to make sure the valve can be switched with the cable without the hose itself moving.

Appreciate the help.