Need some wheel studs

[1sicbronconut]

I have a BC bronco's disc brake kit on my 9" rear just put new bearings on and would like to replace the wheel studs since I had to remove them to pull the rotors off the axle shafts. This style of kit has the rotors on the back side of the axle and the studs are pressed in holding the rotors in place. Anybody know the application or have a part number? The BC part # doesn't seem to cross to anything. https://bcbroncos.com/shop/brakes/r...eel-studs-for-rear-disc-kit-for-early-bronco/

 

[hyghlndr]

I have boxes of new studs for the fronts if the same, pm me if interested.

 

[71broncman]

If there are numbers cast into the top of the head you can use those to cross reference them from the Dorman catalog online or take them into a good parts store and see if they can cross reference them.
Mark.

 

[1sicbronconut]

Yup the parts store I went to told me that number didn't mean anything, I wire brushed it when I got home and low and behold it's a Dorman part#

 

[71broncman]

Good to know it was easily solved. If the person at the part store knew much about parts, they should have known that. It's a crapshoot any time you go to get parts anymore.
Mark.