Landho
Full Member
My CL Add.. https://houston.craigslist.org/pts/d/hanson-off-road-early-bronco/6408750617.html
It's a beautiful winch bumper - but, Wife and kids like the stock chrome front bumper - so, looks like I have a Brand new shiny fresh black gloss powder coated Hanson off-road early bronco winch front bumper for sale. Asking $575 on CL, $550 is my firm low offer.
This one, in black gloss powder coat: https://www.hansonoffroad.com/proddetail.php?prod=FEB1102-P
I did test fit it, so the frame brackets are a bit skuffed where they go on the frame horns and where they hit the power-steering frame re-enforcement - but skuffs on brackets are NOT where they are visible. The brackets will likely require some mod to fit - just based on some research I have been doing, seems everyone has to redrill the braket or frame holes for their liking.
My bronco has new body mounts and 1" BL - my grill also sits about 3/4" further towards nose of frame horns than stock... if you're curious about how it looks in the pics I've attached.
Located in Northwest Houston. I have all of the original packing, it's an 80# VERY large box and a smaller 9# box with the frame brackets.
Their info on the bumper:
The standard Hanson robust design allows for excellent wheel clearance and maximum fender protection. It's handcrafted from 3/16" cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2" dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The unique placement and design of the 1" wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8" pin. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. Bumper is steel bead blasted and finished in a semi-gloss black powdercoat. Units are also available raw.
NOTE: Fairlead Mount Plate, Fairlead, Winch, Off-Road Lights, Recovery Shackles and straps are NOT included with the bumper.
It's a beautiful winch bumper - but, Wife and kids like the stock chrome front bumper - so, looks like I have a Brand new shiny fresh black gloss powder coated Hanson off-road early bronco winch front bumper for sale. Asking $575 on CL, $550 is my firm low offer.
This one, in black gloss powder coat: https://www.hansonoffroad.com/proddetail.php?prod=FEB1102-P
I did test fit it, so the frame brackets are a bit skuffed where they go on the frame horns and where they hit the power-steering frame re-enforcement - but skuffs on brackets are NOT where they are visible. The brackets will likely require some mod to fit - just based on some research I have been doing, seems everyone has to redrill the braket or frame holes for their liking.
My bronco has new body mounts and 1" BL - my grill also sits about 3/4" further towards nose of frame horns than stock... if you're curious about how it looks in the pics I've attached.
Located in Northwest Houston. I have all of the original packing, it's an 80# VERY large box and a smaller 9# box with the frame brackets.
Their info on the bumper:
The standard Hanson robust design allows for excellent wheel clearance and maximum fender protection. It's handcrafted from 3/16" cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2" dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The unique placement and design of the 1" wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8" pin. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. Bumper is steel bead blasted and finished in a semi-gloss black powdercoat. Units are also available raw.
NOTE: Fairlead Mount Plate, Fairlead, Winch, Off-Road Lights, Recovery Shackles and straps are NOT included with the bumper.
Attachments
Last edited:
