• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

New Speaker System

MichaelB14

Full Member
Joined
Oct 27, 2003
Messages
193
Loc.
Cumming, GA
I see people always asking speaker placement questions, so I thought I would post mine. The boxes and the amp rack were both line-x. My goal was to get a good stereo without giving up all of my luggage space.

4 6.5"s hanging off the cage.
speakers1.jpg


2 10" sub boxes made to fit on the wheel wells
speakers2.jpg


Just a pic of the radio...
speakers3.jpg


Splash resistent amp rack behind back seat...
speakers4.jpg


6.5" in the doors
speakers5.jpg
 

brian72

Early Bronco Student
Joined
Jun 18, 2001
Messages
4,157
did you run the wire thru the cage?

Wanna do mine? ;D ;D :eek: %)
 

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Got any other pics of the dash, looks real clean! I love the boat speakers, I wanna do that in mine too.
 
OP
OP
M

MichaelB14

Full Member
Joined
Oct 27, 2003
Messages
193
Loc.
Cumming, GA
Yes the wires are run thru the cage. Secert to that is a shop vac. Duck tape it to the hole you want the wire to end up and feed a string thru the bottom hole. The shop vac will suck it right up there.

I will take more photos of the dash tomorrow in the daylight. I did want minimal stuff on the dash.

The amps stay cool with computer fans. One sucking air in over the amps and one pushing air out.
 

sbolejack

Sr. Member
Joined
May 3, 2006
Messages
357
Loc.
Rogers, AR
MichaelB14 said:
I see people always asking speaker placement questions, so I thought I would post mine. The boxes and the amp rack were both line-x. My goal was to get a good stereo without giving up all of my luggage space.

4 6.5"s hanging off the cage.
speakers1.jpg


2 10" sub boxes made to fit on the wheel wells
speakers2.jpg


Just a pic of the radio...
speakers3.jpg


Splash resistent amp rack behind back seat...
speakers4.jpg


6.5" in the doors
speakers5.jpg

Great looking setup!!!! Where did you pick up the speakers for the cage???
 

cdub71

New Member
Joined
Jul 23, 2006
Messages
1
Looks Good From What I Can See, Do You Have Some More Pics Of Your Ride?
 
OP
OP
M

MichaelB14

Full Member
Joined
Oct 27, 2003
Messages
193
Loc.
Cumming, GA
bigpappa said:
So you run Wakeboard Atlanta? I read there and Wakeboard Alabama a couple times a week. Nice sites. ;D ;D

Yeah, both of those are my sites...

You got a boat? I ended up switching sponsorships to Mastercraft from this and so glad I did. Here is a pic of my boat...

PWT-008.jpg
 

bigpappa

Bronco Guru
Joined
Mar 5, 2003
Messages
1,035
Loc.
Gardendale Al
Yea I have a Ski Nautique 2001 right now. This winter I am planning to put a tower on and build a ballist system in. I just started boarding this year so I am still working on getting up consistantly and getting comfortable on the board moving around.

here is a pic.

By the way Nice Boat!!!!
 

Attachments

  • Boat 013 sm.jpg
    Boat 013 sm.jpg
    105.6 KB · Views: 29
OP
OP
M

MichaelB14

Full Member
Joined
Oct 27, 2003
Messages
193
Loc.
Cumming, GA
Hands down that is the best boat for the money. I had a 89' 2001 as my first boat. Is there much room for a built in ballast in that thing? A tower will help a lot.

bigpappa said:
Yea I have a Ski Nautique 2001 right now. This winter I am planning to put a tower on and build a ballist system in. I just started boarding this year so I am still working on getting up consistantly and getting comfortable on the board moving around.

here is a pic.

By the way Nice Boat!!!!
 
OP
OP
M

MichaelB14

Full Member
Joined
Oct 27, 2003
Messages
193
Loc.
Cumming, GA
Here is the rest of the dash...

dash01.jpg


dash02.jpg


bronco03.jpg


bronco01.jpg


bronco02.jpg


This is a center console I went with that is for a jeep made by Bestop. I think it worked out well.
bronco04.jpg
 

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Alright, now you gotta give the rest of the details. Excellent rig, very clean and in good taste. What's under that beautiful sheetmetal? Also, on the dash, doesnt look like you have a pad but something else there (black...behind the roll bar/grab bar)?
 

bigpappa

Bronco Guru
Joined
Mar 5, 2003
Messages
1,035
Loc.
Gardendale Al
MichaelB14 said:
Hands down that is the best boat for the money. I had a 89' 2001 as my first boat. Is there much room for a built in ballast in that thing? A tower will help a lot.

No there is not a whole bunch of room but I am going to also be replacing the carpet this winter so I am going to build something like This on the sides of the engine and something like This for a back seat. There are some small changes I am going to make to each design to fit my needs but it will be basically the same design.
 

Attachments

  • side ballist.JPG
    side ballist.JPG
    39.5 KB · Views: 34
  • ballist controlls 1.JPG
    ballist controlls 1.JPG
    35.7 KB · Views: 20
  • 4_547.jpg
    4_547.jpg
    133.2 KB · Views: 20
OP
OP
M

MichaelB14

Full Member
Joined
Oct 27, 2003
Messages
193
Loc.
Cumming, GA
PDXBronco said:
Alright, now you gotta give the rest of the details. Excellent rig, very clean and in good taste. What's under that beautiful sheetmetal? Also, on the dash, doesnt look like you have a pad but something else there (black...behind the roll bar/grab bar)?

It was a "frame on" rebuild. Took me over 3 years. I still got some ongoing small issues, but for the most part it is finished. It just has a EFI 302 with a C4. One day I might replace the engine with a 351, but I was already in so deep I didn't want to spend the extra cash. It has 35s with a 3.5" suspension and 3" body lift. We custom built the nerf bars (stole the idea from a set of jeep nerf bars).

There isn't anything between the roll bar and the dash (no dash pad or anything else).
 
OP
OP
M

MichaelB14

Full Member
Joined
Oct 27, 2003
Messages
193
Loc.
Cumming, GA
I see now. I thought you were going to hide the ballast and couldn't figure out where you were going to do that. I would try to put backward seats in those two ballast boxes...

bigpappa said:
No there is not a whole bunch of room but I am going to also be replacing the carpet this winter so I am going to build something like This on the sides of the engine and something like This for a back seat. There are some small changes I am going to make to each design to fit my needs but it will be basically the same design.
 
Top