• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

NP435 synchro problem???

beyer05

Full Member
Joined
Jul 15, 2004
Messages
153
Loc.
Tulsa, Oklahoma
I recently bought a bronco with a NP435 installed and it was hard to shift into 4th. Well, I pulled the tranny and the top cover to find the 3-4 synchro assembly (#21 on the schematic I found at drivetrain.com) was real sloppy, almost just laying in there and part of it was in the bottom of the tranny in pieces. So, I guess my question is, does anyone have a good pic of this assembly so I know what parts I need and how to put it back together. The pic on the net I found shows it like it is one piece, but the parts list shows that you can buy it (#21) as:
1. just the ring,
2. complete assembly, or
3. complete assembly without cone or hub.

I need to know what I need to order. Thanks.
 
Top