NV4500 & D20 w/ twin stick

[Goody]

So I’ve bought the twin stick setup from Tom’s for my NV. Come to find out JB fab does not provide a “bolt on” setup for a t-shift & NV4500... just the shifters, knobs and linkages.... no bracket! Not a big deal and I have a few plans of how to get it done. I contacted JB fab to see what’s up and they sent a few pics but they used and modified something from other mounting brackets that I apparently didn’t have during my tear down. I’ll post the pics (#1 & 2) of the install that JB Fab sent me as a starter and what my current setup looks like (#3). Would like to see what this crowd has done/seen/purchased to get down the road! No matter what I fab up, it’s gonna require drastic modifying/bending of shifter sticks. I’ve already removed 1 of the bolt bosses off the back of the trans housing, just to get the t-case mounted and some paperwork from Advanced Adapters says to remove the front boss, but I’m gonna hold off on that 1 for right now.. Will post pics of my fab once it’s done for future crowds! Dilly Dilly!

 

[JB Fab]

The mounting bracket for the shifters comes from Advance Adapter, typically included with the adapter kit.

AA Part number 715541

Use our shifter part number EB20T T-3. If ordered from our website just put in the notes that you want to use it with a NV-4500 we will include the additional hardware and instructions at no charge.

Cheers,
Jon

 

[JB Fab]

Regardless of where it was purchased, if you need adjustments to the bends for your particular application we are happy to accommodate.

Jon

 

[Goody]

The mounting bracket for the shifters comes from Advance Adapter, typically included with the adapter kit.

AA Part number 715541

Use our shifter part number EB20T T-3. If ordered from our website just put in the notes that you want to use it with a NV-4500 we will include the additional hardware and instructions at no charge.

Cheers,
Jon

Sadly my paperwork is spread b/t the house and work. The BOM# for this bracket must be at work. I intend to cut this bracket up only for thru bolt placement locating as it does me no good. Adapter Kit and trans was purchased thru Bronco Graveyard (all drop ship stuff, I believe), twin stick from tom’s.