• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

OEM Warn Hub Part # for a '68

Bronco_46256

Sr. Member
Joined
Oct 12, 2003
Messages
428
Loc.
Elkhart
What is the Ford Part # for the Warn Hubs that came on a '68 Dana 30 Front Axle.

An OEM pair is available on EBAY and has the OEM Part # listed as:

C6TZ-1104-B

I'd like to replace the original Warn hubs with these, but don't know if they'd work!
 

SaddleUp

Bronco Guru
Joined
May 23, 2004
Messages
9,655
Loc.
Vancouver, WA
Bronco_46256 said:
What is the Ford Part # for the Warn Hubs that came on a '68 Dana 30 Front Axle.

An OEM pair is available on EBAY and has the OEM Part # listed as:

C6TZ-1104-B

I'd like to replace the original Warn hubs with these, but don't know if they'd work!
The part number on the hubs you gave is from 1966. Not that it matters much because the same hubs will work on any of the EB axles made. I just ran a search and the hubs your looking at look like Warn Premiums and they should fit your 68 axle without any problem.

BTW, don't get your hopes up on that auction. My guess is that it will pass the price of brand new ones long before the auction ends. A brand new set of Warn Premiums go for about $89 and it is currently at $66 with 7 hours left and 13 bids.
 

jims66

Sr. Member
Joined
Jun 25, 2001
Messages
961
That number is listed in my Ford parts book for Broncos through 1973 with manual locking hubs (Warn). The description is Warn part number M167. It is a Warn hub reboxed by Ford, I wouldn't pay too much.
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
Our stock 66 roadster had Ford option Warn hubs when we got it. I also found an NOS set in the FoMoCo box so we instaled them during the restoration.

These are a semi desireable option for a true original restoration since they have a number stamped on an oval boss on the dial whereas standard Warns do not (as far as I have seen).

These are also solid brass dials like the original Warn premiums, unlike the yellow clearcoated die cast like they are now.

Like a said, for a true original, I'd give them a few cool points. If for an average daily dirver, I would not spend any extra for them.
 
OP
OP
Bronco_46256

Bronco_46256

Sr. Member
Joined
Oct 12, 2003
Messages
428
Loc.
Elkhart
Warn Hubs Sticker

I let the hubs go, but I'd like to find the WARN sticker that came with the hubs. Are these available anywhere?? Anyone have one? I'd love to replace the original on my '68 dash.
 

66Bronco

Sr. Member
Joined
Jul 31, 2001
Messages
853
That is the correct part number that I have for a '66 Bronco and I'd bet they'd work on any Bronco Dana 30. These would have been a dealer installed option. My '66 Roadster had these when I purchased it and I had a heck of a time removing them (in fact I ended up destroying them). I did manage find an NOS set to replace them but in the end I went with a stock Ford setup instead. Personal preference I guess but I was afraid of having difficulty removing the Warns sometime in the future.



-Terry
 
Top