Options for 3.5" intake air tube for EFI build

[nvrstuk]

I'm looking for options for 3.5" OD intake air tube btw my mass air and TB. Where are you guys locating it? I need about 28" total to extend the cone filter in front of the drivers side fender for hood clearance. I'll put an air deflector btw it and the radiator too. Here's one option: https://www.onlinemetals.com/merchan...p=2&top_cat=60

Couple criteria:

- What are some lightweight options out there. Bare alum tube starts at 75 bucks

- Cost, keep it as low as possible w/o it being butt ugly

- weight to a minimum or mandrel bent exhaust tube would work.

 

[Bronco Brian]

Go Shopping

http://www.intakehoses.com/

 

[nvrstuk]

THAT is exactly what I was looking for! Thanks Bronco Brian.

 

[ntsqd]

Another option, I buy exhaust tube parts from them:

http://www.mandrel-bends.com/catalo...e-54/?osCsid=e67b29a3e5f631a62298077850c49f14

 

[nvrstuk]

yeah, these guys are good I had them ship me up on my mandrel bends for my exhaust. I have called them to see if they do aluminum, I think I want the lighter weight

 

[904Bronco]

Summit carries AEM products > pipes and hoses... An example

http://www.summitracing.com/parts/AIS-2-003-45