• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Painless Harness - Horn and Hazard Issue

ShoeSlinger

Full Member
Joined
Jun 25, 2017
Messages
183
I installed a Painless harness about 6 months a go on my 72' that has a 5.0. Now out of the blue the horn is stuck on and the hazards are flashing. Both of these issues happened at the same time. Bad ground or other cause you can think of?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
48,100
Just to narrow it down, disconnect the plug at the bottom of the steering column and see if both problems disappear simultaneously.
 
Top