- Joined
- Jul 19, 2010
- Messages
- 620
I have 2 hydraulic roller 5.0 cams for sale.
First is a custom hyd roller by Jim Woods @ Fordstrokers.com. It was for my 331 that didn't get used before I switched to a 351. It's a 210/218 duration at .050", lift is .523/.529, 112 LSA. It's billet core due to the lobe design, made for high torque for the heavy Bronco. Cam is new and has never been run, only installed and removed when I sold the engine.
Second, I have a Comp XE270hr-14, part # 35-351-8, this is a hyd roller on a austemper core. Only has dyno time.
$200 ea
First is a custom hyd roller by Jim Woods @ Fordstrokers.com. It was for my 331 that didn't get used before I switched to a 351. It's a 210/218 duration at .050", lift is .523/.529, 112 LSA. It's billet core due to the lobe design, made for high torque for the heavy Bronco. Cam is new and has never been run, only installed and removed when I sold the engine.
Second, I have a Comp XE270hr-14, part # 35-351-8, this is a hyd roller on a austemper core. Only has dyno time.
$200 ea
Last edited: