• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

NC Pertronix Ignitor Module

jeffncs

Contributor
Bronco Guru
Joined
May 4, 2004
Messages
1,894
Loc.
Raleigh, NC
City: Wake Forest
Price: $ 75

I installed this Pertronix igniter onto a new, but low quality, dizzy (included with the sale but do not recommend using without testing). Was used in a 1977 Bronco to replace the factory ignition May work with other vehicles.

Pertronix works great but the dizzy wouldn’t hold timing correctly and wobbled so I replaced the whole assembly. The Pertronix has zero miles on it - engine fired up immediately and ran great but the distributor shaft is bent. Doesn’t affect the Pertronix at all - just can’t return either part

Pertronix p/n D-57-22.

Shipped at your expense.

IMG_2007.jpeg IMG_2010.jpeg IMG_2008.jpeg IMG_2009.jpeg
 
Top