- Joined
- Apr 3, 2007
- Messages
- 75
Front & Rear Protofab Bumpers - $500
Brand new, never really used. Just mounted a few times for mock-up. I'm selling because I'm going in a different style direction with the truck. They are painted in SPI Epoxy Black and I modified them a bit as follows:
FRONT: I cut of the winch mounts and welded in a receiver hitch instead so I could use a portable winch on the front or rear. I still have the original winch mounts if you want to weld them back on.
REAR: I added a small hoop tube to mimic the front style. Unfortunately, Its off a tiny bit in terms of being completely parallel with the main tubes. I have no freakin idea how I missed it before I welded it. Probably because it was not mounted and I didn't view it from a distance. You might not notice it, but I am a bit OCD.
Brand new, the front one is $865 from Protofab and the rear is $504. So $500 for both is a good deal. They are heavy and would need to be picked up.
Feel free to ask (practical) questions - Mike
Brand new, never really used. Just mounted a few times for mock-up. I'm selling because I'm going in a different style direction with the truck. They are painted in SPI Epoxy Black and I modified them a bit as follows:
FRONT: I cut of the winch mounts and welded in a receiver hitch instead so I could use a portable winch on the front or rear. I still have the original winch mounts if you want to weld them back on.
REAR: I added a small hoop tube to mimic the front style. Unfortunately, Its off a tiny bit in terms of being completely parallel with the main tubes. I have no freakin idea how I missed it before I welded it. Probably because it was not mounted and I didn't view it from a distance. You might not notice it, but I am a bit OCD.
Brand new, the front one is $865 from Protofab and the rear is $504. So $500 for both is a good deal. They are heavy and would need to be picked up.
Feel free to ask (practical) questions - Mike
