Q78-15lt who is running a 35.5x10 on an uncut truck with stock steelies?

[LoneRanger]

I cleared my 33x10.50 rollers on the uncut truck with NO lift without issues. I think* Ill be ok, but I am looking for people with actual experience.


ACTUAL EXPERIENCE. If your going to tell me what you think, or that your cut rears are close, or anything else Im not intrested. (no offense meant, just looking for real data)

Also, if you own these tires in any suspension/ cut fender configuration and are a reasonable distance to Williston, FL let me know!



Ive seen posts that call these Swampers a 35.5 OR 36" and the rears a 10.5" width. This is NOT what is on Super Swampers data sheets: 35.5x10



thanks!
L.R.

#DownWithFB
#BackToForums

 

[sprdv1]

back to top for ya

 

[LoneRanger]

Thanks for the bump, I appreciate it. These narrow tires are tricky!

L.R.

 

[bigjhoov]

I've run them. I don't think you will fit them on an uncut.

 

[1sicbronconut]

Up to a 34x10.5x17 on my uncut, I've tried some 34" TSL's but the lugs catch on the fender wells.

 

[LoneRanger]

Up to a 34x10.5x17 on my uncut, I've tried some 34" TSL's but the lugs catch on the fender wells.

Are those rims the same offset as stock steelies?

L.R.

 

[1sicbronconut]

Are those rims the same offset as stock steelies?

L.R.

Nope they have quite a bit more off set, I'll try to measure one this weekend.

 

[LoneRanger]

bigjhoov, I saw this photo of your truck in december of 05' with a 10.5 wide tire........ what was your suspension setup?

 

[bigjhoov]

bigjhoov, I saw this photo of your truck in december of 05' with a 10.5 wide tire........ what was your suspension setup?

That's not mine, just a truck I've always liked. Pretty sure those are 33x9.50-15 BFG A/T's which were discontinued quite a few years ago. I'd say that's a 2.5" lift if I had to guess.