• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Radio Static

Rickb1b

Sr. Member
Joined
Feb 29, 2012
Messages
447
Ok guys getting ready for winter I decided to update my heater blower motor with the Chevy mod.

Now when I turn on the heater motor I get massive static through the radio. Anyone have any ideas for eliminating this static.
 

JohnJohn

Contributor
Bronco Guru
Joined
May 6, 2005
Messages
2,179
Loc.
Richmond
Make sure you have a clean ground.
Then make sure your power wire is not shared with a bunch of other wires
Also make sure your speaker wires are not near the blower wires
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
1-turn off the heator
2-put a CD in
3-turn the XM on instead
4-turn off the radio

Just being a smartass. Im always dealing with this and CB radios. Does your radio have a noise filter?
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Also move the ground for the radio or blower motor if they are on the same one there tends to be feed back. One other thing that may be done is install a noise filter on the radio. Another option is you can install a 0.5 uF bypass capacitor between the heater motor and ground. most parts stores or radio shack should have these.
 
Top