Rear Bump Stop Bracket bolts

[gmduncan]

I have a few questions about the rear bump stop bracket bolts. I was spraying penetrating oil on them for a while and they still snapped.

Hopefully, someone can help me out.

What is the the bolt thread?

What is the length?

Do they screw into the frame?

They don't appear to thread into the frame, but I could be wrong...

Thank you,
George

 

[LilMixedUp]

I not 100% here, but I think it's 5/16 standard thread. It's not very long at all 1/2-3/4 inch bolt. But it's threaded through the bracket and frame. Should be easy enough to drill and ez-out or redrill and tap. I'll check tomorrow when I'm at the shop and if you don't get better info tonight I'll let you know

 

[gmduncan]

I not 100% here, but I think it's 5/16 standard thread. It's not very long at all 1/2-3/4 inch bolt. But it's threaded through the bracket and frame. Should be easy enough to drill and ez-out or redrill and tap. I'll check tomorrow when I'm at the shop and if you don't get better info tonight I'll let you know

Thank you and much appreciated.