Rear Corbeau Baja SS mounting

[kat]

Been on the phone with WH trying to figure out how I would mount their rear seat FLAT to the bed of my '76 Bronco. The picture of the adapter isn't the best in the world and after a conversation with WH they explained that there will be a 2' space between the bottom of the adapter to the floor of my Bronco.
I have already purchased a few items to mount, because I want easy removal and be able to have the rear seat facing forwards or backwards. Here are some links of what I purchased.

These are the bolts that fasten into the rail
http://www.macscustomtiedowns.com/product/m10-threaded-stud/VersaTie-Fittings

And these are the actual rail that will be in between the ribs of the bed of Bronco.
http://www.macscustomtiedowns.com/p...cess-mount-square-edge-series2/VersaTie-Track

I haven't bought the seat yet and it might be that I put the cart before the horse on my project. Please any pictures or suggestions will be great. Thanks

 

[FordBronc]

Have you looking into the ones Corbeau sale?

http://corbeau.com/ford-bronco-66-77-36-baja-bench-rear-seat-bracket.html

http://corbeau.com/ford-bronco-66-77-40-baja-bench-rear-seat-bracket.html

http://www.macscustomtiedowns.com/product/single-stud-tie-down-ring/VersaTie-Fittings

We have used these in the back of helicopters, makes for a great way to have a very versatile tie down system.

 

[NYLES]

remove tabs from seat weld in some angle iron tabs that put bolt hoes outside the seat thats as low as your gonna get it

 

[kat]

Have you looking into the ones Corbeau sale?

http://corbeau.com/ford-bronco-66-77-36-baja-bench-rear-seat-bracket.html

http://corbeau.com/ford-bronco-66-77-40-baja-bench-rear-seat-bracket.html

http://www.macscustomtiedowns.com/product/single-stud-tie-down-ring/VersaTie-Fittings

We have used these in the back of helicopters, makes for a great way to have a very versatile tie down system.

No I didn't realize they sold them...the first one is the one that ALMOST looks like the one WH sales. But the picture wasn't that great and it looked to me like it flat bars didn't sit on the bed of truck...thanks

 

[76YETI]

Why do u want it so low? I think the corbeau bracket is too low, member on here made me one that sits about 4" in the front and slopes to the rear...very good sitting position.

 

[kat]

Why do u want it so low? I think the corbeau bracket is too low, member on here made me one that sits about 4" in the front and slopes to the rear...very good sitting position.

So the bracket is to low? What is to low?? Where does the bracket put the seat (actual where you sit in it)????

 

[76YETI]

I read some posts tha said the corbeau rear seat bracket sat too low and several members mentioned another member who fabricated one I bought one from him and I think the seat sits about perfect. I just measured and the bottom of my seat is about 6" from the floor and slants back about 2-2.5". The corbeau bracket puts the seat about 2-3" off the floor and is level. I don't think it would be a very comfortable sitting position. Just my thoughts and want I can remember. Good luck

 

[Lunar-tic]

Concur, make your own. Way cheaper, plus you can customize the rake. Check out post #50 on page four. I had it Rhino Extreme coated after it was done.

http://classicbroncos.com/forums/showthread.php?t=248552&page=4&highlight=corbeau