jason.k
Jr. Member
So I hung my doors today and ran into a problem. Driver side door is the biggest problem. I think my door post is pushed in but the measurement is right from what I've read. From top of door post measuring across the bronco its 55 3/4" and at the bottom its 57". Does this seem right? If I put a straight edge across the door and the upper quarter panel there is a gap of about a 1/4" right at the rear door post. The hinge at the front is slid as far in as it will go to try and push the back out but it really seems that the post at the top needs pulled out. The bottom of the door looks pretty good. I'll send pics tomorrow.