• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear shackle

gmduncan

Sr. Member
Joined
Apr 30, 2019
Messages
388
Loc.
Annapolis
I think I know the answer. I removed the inner shackle bolt sleeve and rubber bushing.

First picture shows the inner metal sleeve and the other metal sleeve. The second picture shows the inner metal sleeve removed from the shackle and an arrow pointing to what I think is another metal sleeve that needs to be removed. The third picture is the new bushings next to the shackle. The fourth picture the new bushing on top of the shackle and the other metal sleeve. They appear to be the same size and without removing the other metal sleeve, the new bushing will not fit.

It looks like there's another metal sleeve that needs to be removed before I'm able install new bushing and metal sleeve. Can anyone verify that fore me please....?

Thank you.
 

Attachments

  • IMG_2243.JPG
    IMG_2243.JPG
    155.4 KB · Views: 72
  • IMG_2244.JPG
    IMG_2244.JPG
    180.4 KB · Views: 74
  • IMG_2245.JPG
    IMG_2245.JPG
    200.1 KB · Views: 94
  • IMG_2246.JPG
    IMG_2246.JPG
    122.4 KB · Views: 85

EPB72

Contributor
Bronco Guru
Joined
Jul 13, 2019
Messages
1,216
Loc.
Pleasant Hill, CA
Yes to install polyurethane bushings the outer sleeve needs to be removed.. as it would also need to be removed if installing stock style as well…
 

papy

Contributor
Sr. Member
Joined
Jun 13, 2012
Messages
905
just did (tried) this on my 79 bronco. the inner sleeve was so rusty it wouldn't come out - tried everything. I ended up buying new shackles for less than the cost of the replacement bushings.
 
Top