• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear Spring Shackle Bushings?

Gordys74

Sr. Member
Joined
Sep 17, 2002
Messages
555
Loc.
Southern Iowa
Are the rear spring shackle bushings difficult to replace? I'm putting new rear springs on my rig and the springs have the new bushings already in them, but i forgot about the shackle bushings. How hard is it to get the old ones out and the new ones in? This is on my 74.

It probably still has the original ones in it, so I'm guessing they're shot. All the bushings I've gotten to so far were.

Thanks!
 

stevew

Bronco Guru
Joined
Jun 21, 2001
Messages
2,123
Loc.
Elliston Montana
The quickest & easiest way is to burn them out with a cutting torch . Theres a thin metal sleeve that has to come out for the poly bushing to fit . Next choice is an air hammer but even that takes forever . I use a combination of both , takes a few minutes .
 

Jeepster

Bronco Guru
Joined
Jul 13, 2001
Messages
1,507
what is the general opinion as to what kind of bushings to replace with, rubber or poly?
 
Top