• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Repair Manual

72moore

Sr. Member
Joined
Sep 17, 2003
Messages
392
re

Depends what you are doing to your rig.
It is helpfull brakes, and alot of tune up info
lacking a little on dana 44 build ups, I would recommend one
 

popsbronco

Full Member
Joined
Jan 13, 2005
Messages
215
Loc.
Edmonton Canada
i second that motion.
Its been heplful for me for basics
The oringinal shop manuels are more detailed and best i found the four volumes at the public library?
 

Mark

Contributor
Bronco Klutz
Joined
Aug 29, 2003
Messages
5,417
Loc.
NW Indiana
Yes, you should have the Chiltons - it is helpful.
I really like the Haynes better though. I compare the two when I'm doing things. It's nice to see how they write things up differently. They are good compliments to each other.
I also recommend the factory shop manual set.
 

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
I have both the chiltons and the haynes manuals. Both are pretty good but the best thing you can get is a ford shop manual. I found mine on ebay, it is a complete set of five books covering everything on my truck. My set covers all ford trucks for 1974. It cost me about $40 but it has been well worth it. Don't buy the CD versions you see on ebay, the ones I have seen are not very complete.
 

ElJefe

Full Member
Joined
Mar 11, 2005
Messages
200
Loc.
San Diego
One place the Chilton's really shines over the Haynes is the tune-up and smog control system info. Chilton has actual numbers. I can't tell you how many times I end up pulling out the chilton manual because the Hayne's says to look at some damn sticker that dissappeared 8 paint jobs ago. Frustrating as hell if you ask me. But since no one actually asked me...
 

TOFIC

Bronco Wrencher and Fixer
Joined
Jan 6, 2004
Messages
3,740
Loc.
Redcliff Alberta
bigjhoov said:
Is the Chilton 66-77 manual the most helpful available?
In my humble opinion::

THE best manual for the Bronco is the Ford service manuals. In my case(73) there were 5 of them. Cost me 35 dollars 10 years ago.
Chilton is really good but lacks in detail
Hayes is a little more detailed but not up to snuff as far as the Ford stuff is concerned.
You can sometimes buy a set on Ebay but classicmotorbooks is another place to look

TOFIC
 

tcjones76

Sr. Member
Joined
Aug 17, 2002
Messages
888
Loc.
Tyngsboro, Ma
I lucked out, my 76 came with a complete set of Ford Truck Shop manuals, of course I don't really need the sections for the L-series Tilt-Cabs!!!
 
Top