GA Resuscitating a 74- VintageAir,Tuffy,Door Hinges,Plate Bumpers,etc

[BigPrince]

Bought a great running Bronco from a local guy. Drove good on the test ride and seemed good for 2 days then blew up. 351w Engine needs rebuild with multiple problems. I knew this but Tub bed is rusted and the fuel tank was removed along with all parts. PO even welded the fuel cap area shut so I need to recut that out and get everything needed. Needs a new roll cage as well. So, looking to get the following if anyone has a need to sell:

VintageAir Heater/Air install kit
New radiator (for v8 manual)
Tuffy Glove Box
Sound bar

Pretty much everything to take a good deal to a bad one
I'm in Atlanta but will drive to pick up large items in a decent radius and will pay to ship for a good price of course.
I'll be shopping online for these things and wil update the list as I acquire.
Thanks guys!

 

[Chethair]

Parts

I have many of the parts you need. I bought a 73 last night to get some parts. You can either email me @cchafin@hotmail.com or 865-924-9575. I am in Knoxville so not too far away from you. I have a complete C4 setup, rollcage, dash, and a bunch of the other things you are looking for. Thanks,
Chester

 

[broncosam]

Sent you a PM

 

[BigPrince]

Thanks everyone for the replies. I've gotten a few things and working with some folks on some others. I do appreciate it!!

 

[JoeLat]

just listed a Tuffy Glove Box, let me know if you are interested. Thanks, Joe

 

[BigPrince]

While interested, unfortunately I didn't see it in time. Thanks though.

Still need everything listed especially all the fuel parts! Thanks!

 

[JoeLat]

didn't see your post until after I listed. Sorry, would have sent you a message first had I known. Good luck with the rest of the build. Bummer the engine blew on ya just after you bought it.

 

[BigPrince]

didn't see your post until after I listed. Sorry, would have sent you a message first had I known. Good luck with the rest of the build. Bummer the engine blew on ya just after you bought it.

No worries at all! I appreciate it and hope I'll get her in good shape soon. Thanks!

-Don

 

[BigPrince]

Got deals on a few more things. Thanks guys!!

Added that I need a wire harness (Centech/Painless) so if you have one you ended up not using please PM me! Thanks!!

 

[BigPrince]

Got a few things but still need everything listed above. Giving it one go round more before I suck it up and buy retail Thanks!