• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

revive the headliner???

fatboy4211

Sr. Member
Joined
Feb 27, 2010
Messages
613
Loc.
Ennis, TX
any ideas on how to revive the headliner. its in good condition just wavy from the POs inattention. wife is #$%^#% about how much the bronco is in my pocket. kinda hard to tell her the headliner followed me home. figured you guys may have some ideas.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Unfortunely even if its in good condition age just takes its toll. Wavy comes from moisture not much you can really do about it. Except maybe installing some insulation on the roof and gluing the headliner to the insulation.
Mine was the same way good condition a little wavy and dirty so I decide I would freshen it up with a new coat of paint actually I think I used vinyl dye(so i wouldnt have paint build up) anyhow it seemsed to be working pretty good but one of the front flaps decided it no longer wanted to be part of the assembly so now I pretty much need a new headliner to make it look like it should. Maybe you'll have better luck.
 

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
Mine looked like crap as well. i tried painting it and it looked OK but I was not really happy with it. A while back, we were recovering some furniture and I found myself with the wife in a Fabric store. This place was huge and had every kind of fabric you could imagine. While there, I found fabric that looked alot like the material used for the headliner in our Expedition. I think I paid a couple bucks a yard for the fabric. I used 3M spray adhesive to attach it to the cardboard headliner and reinstalled it with some insulation behind it. It came out very nice.
 

Attachments

  • IMG_0329s.jpg
    IMG_0329s.jpg
    39.1 KB · Views: 102
  • IMG_0330s.jpg
    IMG_0330s.jpg
    49.6 KB · Views: 87
  • IMG_0331s.jpg
    IMG_0331s.jpg
    33.1 KB · Views: 91
  • IMG_0333s.jpg
    IMG_0333s.jpg
    37 KB · Views: 88
  • IMG_0334s.jpg
    IMG_0334s.jpg
    60.3 KB · Views: 87

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,048
I've thought about removing mine to use as a template and cutting new panels from masonite. Then covering the masonite with fabric or automotive carpet and 3M spray adhesive.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
I bought a new one from one of the vendors. It didn't fit nearly as well as the origonal and was really cheesy. I cleaned and painted the origonal and reinstalled it. I returned the crummy aftermarket one to the vendor and let them know of the problem.
 

tmacstickman

Sr. Member
Joined
Feb 9, 2005
Messages
703
Actually, you can revive that headliner using moisture. Wait until the spring and when the sun is hot. I sprayed down my headliner and sandwiched it between cardboard and laid it out on the driveway. I applied some 2 x 4's on top, spaced about 10-12" apart and left it for 2 days. Lay out enough cardboard to cover the headliner, and make sure it will be in the sun. I used a spray bottle and used bottle water because I was on a well with hard water at the time,and some well water will leave behind deposits or discoloration.

It was the original headliner, and I wasnt ready to start replacing things on it and the results were pretty good.
 

Sac '68 sport

Bronco Guru
Joined
Apr 9, 2004
Messages
1,176
Loc.
Orangevale
I second the recover. I did mine back when I still used the hard top and it came out great and was a really easy and cheep project. Probably depends on how wavy yours is though.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Even if you straighten it back out with water it will soon return to its wavy shape due to moisture. it can be worth a try but I dont see it working long
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
Once it's dry & flat, varnish the back/top with spar polyurethane to seal out the moisture that condenses on the inside roof and warps the paper. Then start working on all those rain leaks... ;) Applying DynaMat or any other insulation to the roof will do the same thing.
 
Top