Rim ?

[American Pride]

I am going to buy rims off the internet and want to make sure they will fit.
This is the reply from the seller. (15 inch)
Thanks for any help
The bolt patern of the rims, from center lug hole to center lug hole is 5.25 inchs (five and a quarter inches) The rims are 7 inches wide, and from the back side where the lug holes are to edge of rim is 4 inches. These rims where on a 1978 ford f 150 with a 390.

 

[SWFLABRONCO]

Not sure of the backspacing, but the lug holes should be 5 on 5.5" to fit standard axles.

 

[Baja71]

You measure 5 hole rims from the center of one lug hole to the outside of the one opposite, so his should measure 5.5" if you correct for his error in method.

 

[cbford]

I am running a set of these on 76 axles (disk/drum). I made a 1/4" spacer to fully clear weights on the front, and they bolt right up in the rear.

 

[American Pride]

thanks guys

 

[bigjhoov]

I'm selling these for $200, they'll fit for sure.