• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Roadster door installation

dead road

Full Member
Joined
Nov 18, 2008
Messages
223
Loc.
Ridgefield WA
Just bought a set of Bronco Design roadster doors. I am concerned that they will rub against the door jambs and wear off the paint. I am going to periodically switch back an forth from roadster doors to reg doors and top. I don't want the jambs to look like crap and I have brand new paint. Any body run into this prob and is there a solution.
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
I make a clear decal to cover that area. I've thought about making a another run of them, so if there is interest I'll make some more.
Steve
 

barronj

Bronco Guru
Joined
Jun 6, 2009
Messages
1,859
I make a clear decal to cover that area. I've thought about making a another run of them, so if there is interest I'll make some more.
Steve

There's a pretty heavy clear protectant that the body shops have access to. I had the bumper of my VW Passat repaired, and instead of using a factory protectant at the cargo ledge, they used a much larger piece (which I had them remove). You can trim to fit, and it goes on clear, and it's very durable. Not sure how expensive it is.

I'm glad you started this thread, as I have similar intentions.
 

albino

New Member
Joined
Apr 18, 2008
Messages
37
Loc.
Sacramento area
There's a pretty heavy clear protectant that the body shops have access to. I had the bumper of my VW Passat repaired, and instead of using a factory protectant at the cargo ledge, they used a much larger piece (which I had them remove). You can trim to fit, and it goes on clear, and it's very durable. Not sure how expensive it is.

I'm glad you started this thread, as I have similar intentions.


What you are talking about, I had put on my corvette. It was called "clear bra", and it was made by 3M I believe. Yes it is very durable.
 

barronj

Bronco Guru
Joined
Jun 6, 2009
Messages
1,859
What you are talking about, I had put on my corvette. It was called "clear bra", and it was made by 3M I believe. Yes it is very durable.

Exactly. I called the automotive paint supply to ask about it and he said exactly that. They're putting them on the front bumpers & even hoods, as well as splash guards & cargo/rear bumper steps.
 

kaw550

Bronco Guru
Joined
Jul 4, 2007
Messages
1,136
The last time I was at PEP Boys they sold it by the roll. I am not sure how it would compare to something from an auto body supply shop.
 

Gas Pig

Bronco Guru
Joined
Oct 19, 2005
Messages
2,778
Yep the 3M stuff is darn near bulletproof and you almost can't see it if installed correctly. I used in and hand full of places on my U13 and my 72 and it's worked great!
 
Top