• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

TX Rocker Panel Moulding

Status
Not open for further replies.

COSCAG00

Sr. Member
Joined
May 16, 2011
Messages
426
Trying to clean out the parts some:

Molding is in pretty good shape but does have a couple of issues. First one is that there is a hole in each end of the molding where a screw was used to attach it to the rocker panel (total of 4 holes). One has a small ding and the other is crushed slightly, but looks like it could be straightened out pretty easily. They are both straight and in decent shape.

Tried to take pictures of the bad spots.
 

Attachments

  • RM1.jpg
    RM1.jpg
    99.7 KB · Views: 79
  • RM2.jpg
    RM2.jpg
    86.5 KB · Views: 66
  • RM3.jpg
    RM3.jpg
    101 KB · Views: 59
  • RM4.jpg
    RM4.jpg
    91 KB · Views: 59
  • RM5.jpg
    RM5.jpg
    96.1 KB · Views: 60
  • RM6.jpg
    RM6.jpg
    86.4 KB · Views: 59
Status
Not open for further replies.
Top