• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

RuffStuff 2+ sping perch kit

OP
OP
68rustbucket

68rustbucket

Full Member
Joined
May 1, 2006
Messages
226
Loc.
San Marcos,TX
Since there are no u-bolts when these are used, I'll bend some flat stock to box the underside of axle housing. Then attach to bottom of spring perches.
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,033
Hmm, interesting...I'm making something similar to eliminate the u-bolts since I welded the Ruff Stuff back brace onto my F150 housing, but was just going to push the axle back an inch with the leaf spring pin. I've got the housing gusseted with their standard perches in place, just need to weld on the "wings"...although mine is actually just a flat plate, so it'll add a little lift as well.
 
Top