Saginaw/ Delphi/ HD PS pump solid answer

[MiamiMuffDiver]

I know this question had one up VERY often but if searches and haven't found a solid answer!

Can anyone tell me what vehicles carried the correct powersteering pump with V-belt pulley that will bolt up to the vendors brackets?
I have seen post stating that 93 Chevy 1500 will fit but that's a serp belt setup.
Also seen the 85 Chrysler fifth ave. but which pulley fits that one?

Thanks again

 

[scrapman1971]

All the saginaw pumps will bolt up to the brackets that the vendors sell for saginaw pumps. Most vendors sell the newer design that has a notch cut out to clear some reservoirs if it doesnt have the notch some reservoirs can hit the bracket and not bolt up. I cant help u on the pulley. Most vendors sell the correct pulley also

 

[Chief Master Sergeant]

Just use NAPA pulley, part #73077. Cost me less than $30. You will need the tool to install and remove pulleys, but it's relatively simple.

I used the Duralast pump from Autozone for a K3500 (I think), part #7137. I used the WH bracket and had to slightly grind it to make the pump work with it. Not supposed to I guess, but I put some paint over the spot and pressed on with business. Good luck!

 

[MiamiMuffDiver]

perfect thanks!

 

[Banjer Picker]

I'm using a Sag pump from an '82 Chevy c-10 DIESEL pick up truck. It's a dual return though. Been working great!