Searched and can't find anything on the Cowl to Hood seal

[Inthegarage]

It's a 72 and the seal I was sent has plastic clips that should go into holes. BUT I have no holes on the cowl or the hood. Anyone have a picture of an installed seal ?? TIA

 

[AZ73]

They're hard to find at first and a bear to push the clips into. I just did mine this week. The holes are facing backwards on the cross member just forward of the back of the hood. I ended up using a small, curved nail puller backwards to leverage push them in, and a little car wax to lube them. I put down a thin piece of metal strip wrapped in blue painter's tape on the back hood so the tool wouldn't gouge the paint.