Seeing what is out there for trade

[Incognito]

I Am considering starting my next Bronco project.

I Am looking to see what anyone is willing to trade.

Pics in my gallery, specs below. All it needs are disc brakes and new 3 1/2" rear leafs.

I would take a 2005 or newer 350z convertible with nav or similar valued vehicle in trade. Honda S2000, Cadillac CTS.

Just testing the waters to see if something interesting comes along.

1967 Specs

Engine 289ci original
Carb Holly 2 bbl
Headers WH Shorty
Alternator GM 1 wire internal regulated
Starter Stock
Radiator Ron Davis Aluminum with aluminum shroud, zinc plug and cap.
Mufflers Magnaflow


Drivetrain
Trans JD 3 spd on floor
t-case Dana 20
Gearing 4.11 original
Front end Dana 44
Lockers none
rear end Ford 9"
Lockers none
Brakes Front Drum
Brakes rear Drum
T-Case shift T
Clutch
brakes Power Booster WH

Suspension 3 1/2 " lift
Springs Duff 107V-3 1/2" variable rate coils
Shocks Rancho 5000
Lift-Susp 3 1/2"
Lift-body none
traction bar rear None
front Radius arms Stock
Rear leafs stock with lift block
Bushings New Duff Poly

Steering Stone Crusher drag link & tie rod-Single stabilizer
Box Stock
Wheel Grant model#
shaft Stock
Column Stock auto


Fuel Tank 23 Gal BC
Pump Stock


Bumper
front Protofab Rock Solid winch with push bar
rear Protofab tube-stock swing out spare tire carrier

seats Procar Rallye Black
Seat belts 3 pt shoulder
dash Terra Comp, Auto Meter gauges, 12volt guy switch panel, bronco column cover
Hella map light
Rear seat Stock rear recovered.
Horn Hella dual air horn
stereo JVC KD APD58
amp Kenwood powered sub under pass seat.
speakers Pioneer 5 way 6 x 9, pioneer 3 way 6 1/2"
Console Tuffy locking w stereo
Wiring Centech harness

Paint color Gunmetal Grey Acryllic
Blackout color Duplicolor black
liner brand Herculiner
undercoat
hood Stock-
top Bestop with tinted windows

Onboard Air ViAir 450c w/ 2.5 gallon tank
Lights PIAA 520 ATP and PIAA 520 driving, PIAA 1400 rear work lights
Winch
tires New BFG 33 x 12.5 x 15 At/KO
wheels American eagle 15x10 Model 186 5 x 4.5 3 1/2" backspace?
hubs Stock
Roll cage Smittybuilt with front cage
flares Wildhorses Gorilla Warflares black with black hardware


Rocker guards Hanson rocker guards
E Brake original
Shift Duff stainless shift knobs
Heater Removed

 

[rednck21]

what about a mint 01 mustang GT convertable with less than 50k original miles?

 

[cgbexec]

How about taking over the payments on a 2008 Ford Mustang Roush P-51A (510 H.P.? It is a $64,000.00 car. I ordered it earlier in the year and took delivery of it in mid August. I owe $37,900.00 on it. I would trade you even up for taking over the payments on the Mustang.

E-mail me if you have an interest. cgbexec@aol.com

 

[Incognito]

Possible trade

Not interested in a Mustang, sorry.

I need a vehicle I can drive 100+ miles a day with good fuel economy. 2006 350Z with low miles and NAV would be first choice.

Even swap or small diff as this Bronco has alot of $ into it.

 

[raging56]

Not interested in a Mustang, sorry.

I need a vehicle I can drive 100+ miles a day with good fuel economy. 2006 350Z with low miles and NAV would be first choice.

Even swap or small diff as this Bronco has alot of $ into it.

Tossing it out there. I have a 2008 Nissan Altima 3.5V6 with every possible option. I'm currently leasing.
These are stock photos but this is what it looks like. (mine has the spoiler, moon roof, fog lights, HID headlights,7" nav screen,bose sound system, heated seats, dual climate control etc etc)

 

[Incognito]

Trades

Anyone interested in a trade???????

FJ Cruiser
350Z
S2000
CTS

anything of equal value that is paid for-no take over pmts